Answering Calls Using The Base Unit; Adjusting The Ringer Volume; Changing The Ringer Tone - Panasonic KX-TG5583PK Operating Instructions Manual

Answering calls using
the base unit
When a call is being received, the IN USE
indicator flashes rapidly.
1
Press {SP-PHONE}.
2
Speak into the MIC.
3
When finished talking, press {SP-
PHONE}.

Adjusting the ringer volume

4 levels (high/medium/low/off) are
available.
While the base unit is not being used,
press {V} or {^} repeatedly to select the
desired volume.
L To stop ringing, press {STOP}.
To turn the ringer off, press and hold {V}
until the base unit beeps 2 times.
O
will be displayed.
L
Note:
L When the ringer volume is set to off, the
base unit will not ring for outside calls
and it will ring at the low level for
intercom calls.
L When the ringer volume is set to off, the
base unit will not announce caller names
(page 33).

Changing the ringer tone

You can change the base unit ringer tone
heard when an outside call is received.
There are 3 tones and 4 melodies.
1
Press {^} or {V}.
2
Within 10 seconds, press {<} or {>}
repeatedly to select the desired ringer
tone.
L To stop ringing, press {STOP}.
For assistance, please visit http://www.panasonic.com/consumersupport
Making/Answering Calls
Note:
L If you subscribe to a distinctive ring
service (such as IDENTA-RING), select
a tone (Tone 1 to 3). If you select a
melody, you will not be able to
distinguish lines by their ringers.
L If you select one of the melody ringer
patterns, the ringer will continue to
sound for several seconds if:
– the caller hangs up before you answer
the call.
– another person answers the call using
another phone connected on the
same line.
27