1. Manuals
  2. Brands
  3. Marshall Electronics Manuals
  4. Media Converter
  5. VS-103E-3GSDI
  6. User manual

Marshall Electronics VS-103E-3GSDI User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Marshall Electronics
VS-103E-3GSDI
HD H.264 Encoder
User Manual
Firmware Version v1.0
Copyright ©2016, Marshall Electronics, Inc.
All Rights Reserved. This document may not be copied.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VS-103E-3GSDI and is the answer not in the manual?

Questions and answers

Related Manuals for Marshall Electronics VS-103E-3GSDI

Summary of Contents for Marshall Electronics VS-103E-3GSDI

  • Page 1 Marshall Electronics VS-103E-3GSDI HD H.264 Encoder User Manual Firmware Version v1.0 Copyright ©2016, Marshall Electronics, Inc. All Rights Reserved. This document may not be copied.
  • Page 2 Product options and specifications can be changed without notice. The information in this manual is furnished for informational use only and should not be construed as a commitment by Marshall Electronics, Inc. Marshall Electronics, Inc. assumes no responsibility or liability for any errors or inaccuracies that may appear in this publication. Safety Precaution We appreciate your video encoder purchase.

  • Page 3: Table Of Contents

    1. Introduction .......................... 4 1.1 About this Manual ......................4 1.2 Features ........................4 1.3 Product and Accessories ....................5 1.4 System Connections ..................... 7 2. Installation .......................... 11 2.1 Connecting Video ....................... 11 2.2 Connecting Audio ....................... 11 2.3 Connecting Serial Ports ....................11 2.4 Connecting Sensor &...

  • Page 4: Introduction

    Data Pass-Through Mode: Serial Data Communication between IP Encoder and Decoder  Data Pass-Through Mode: Serial Data Communication between Encoder-Decoder Sensor and Alarm  Supports direct connections of External Sensor and Alarm Devices  Event Alarm User Manual VS-103E-3GSDI – V1.0 Page 4 of 63 2/2016...

  • Page 5: Product And Accessories

    Diagnose and upgrade through dedicated program called VS Manager  System Configuration using Internet Explorer High Reliability  Reliable Embedded System  System Recovery by Dual Watch-Dog Functions 1.3 Products and Accessories User Manual VS-103E-3GSDI – V1.0 Page 5 of 63 2/2016...
  • Page 6 HDMI Video & Audio Input HDMI Output HDMI Video & Audio Output USB Port USB 2.0 1000/100/10MB Base-T Ethernet Reset Button Initialization of Network Setting Sensor Sensor Input Alarm Alarm or Relay Output User Manual VS-103E-3GSDI – V1.0 Page 6 of 63 2/2016...

  • Page 7: System Connections

    Transmit/Receive Decoder Receive Transmit/Receive Transmit/Receive The system mode is defined by the video communication and this system mode is capable of single directional transmission of audio and/or bi-directional serial data. User Manual VS-103E-3GSDI – V1.0 Page 7 of 63 2/2016...
  • Page 8 In this configuration, a site can be monitored from many remote center locations. Maximum connections would be limited by the network bandwidth. Functionally, the VMS (Video Management System) software can replace the decoder. User Manual VS-103E-3GSDI – V1.0 Page 8 of 63 2/2016...
  • Page 9 In this arrangement, video and audio can be re-transmitted from one center to another center. The arrangement is useful when the network bandwidth at the site is limited while there is more than one center wanting to monitor the site. User Manual VS-103E-3GSDI – V1.0 Page 9 of 63 2/2016...
  • Page 10 VMS (Video Management System) is a Windows based remote monitoring program to access multiple encoders for real-time monitoring or control of the encoders and connected cameras. Please refer to the VMS User Manual for more information on VMS. User Manual VS-103E-3GSDI – V1.0 Page 10 of 63 2/2016...

  • Page 11: Installation

    2.4 Connecting Sensor and Alarm Connect Sensor and Alarm Devices to corresponding terminals accordingly. 2.5 Connecting Power After confirming the Power Source, connect Power Adaptor and connect the 12VDC Connector to the System. User Manual VS-103E-3GSDI – V1.0 Page 11 of 63 2/2016...

  • Page 12: Check If It Works

    These LED’s above show that the Decoder has started without connecting to an Encoder. Once an Encoder is connected, the color of “LINK” LED Display will turn green and the “DATA” LED will blink as video or audio data transmissions occur. User Manual VS-103E-3GSDI – V1.0 Page 12 of 63 2/2016...
  • Page 13 Connected to a Remote System Red Blinking Decoder Only: trying to connect to an Encoder Orange Illegal Connection (unsupported combination of system modes) DATA Green Data Transmission in Progress Data Loss No Data Transmission User Manual VS-103E-3GSDI – V1.0 Page 13 of 63 2/2016...

  • Page 14: System Operation

    Open Internet Explorer and enter the Video Encoder’s IP Address. The system will ask for confirmation to install Active-X Control. Once authorized, Internet Explorer will begin to display video images from the Encoder as shown below: Default IP Address : http://192.168.10.100 User Manual VS-103E-3GSDI – V1.0 Page 14 of 63 2/2016...
  • Page 15 When the sensor of the encoder is working, the sensor light turns red. Operate the Alarm Device by pressing the number icon. This encoder supports One Alarm Output. A number icon indicates the status of the alarm device. User Manual VS-103E-3GSDI – V1.0 Page 15 of 63 2/2016...

  • Page 16: Initialization Of Ip Address

    3. Once the system reboots, IP Address will be set to the System Default as below: IP Mode Fixed IP IP Address 192.168.10.100 Subnet Mask 255.255.255.0 Gateway 192.168.10.1 Base Port 2222 HTTP Port User Manual VS-103E-3GSDI – V1.0 Page 16 of 63 2/2016...

  • Page 17: Remote Configuration

    The configurations are grouped into 9 categories: Video & Audio, Image, Network, Event, Record, Device, PTZ, System, and User. To save configuration changes, click “Apply”. Leaving the page without clicking “Apply” will discard any new changes. User Manual VS-103E-3GSDI – V1.0 Page 17 of 63 2/2016...

  • Page 18: Video & Audio Configuration

    The information provides current information for Video and Audio Settings. Encode Performance Calculation Shows the performance usage rate according to the value set at Encode mode. Input Format Choose the appropriate Input Format from the list provided. User Manual VS-103E-3GSDI – V1.0 Page 18 of 63 2/2016...
  • Page 19 This profile includes all the features that are supported in the constrained baseline profile, plus three additional features that can be used for loss robustness. User Manual VS-103E-3GSDI – V1.0 Page 19 of 63 2/2016...
  • Page 20 When H.264 is chosen, Wither Bitrate Mode or Quality Mode can be selected for Preference Mode IN. MJPEG supports Quality Mode only. Audio Audio Source Select the Audio Source: Embedded or Analog Stereo. User Manual VS-103E-3GSDI – V1.0 Page 20 of 63 2/2016...
  • Page 21 Receive Only Tx & Rx Transmit and Receive Input Gain Audio Input Gain ranges from 0 to 31. Output Output Format Select the format of output when Enable Preview is selected. User Manual VS-103E-3GSDI – V1.0 Page 21 of 63 2/2016...

  • Page 22: Image Configuration

     Hue: Controls input video hue by selecting values between 0 and 255.  Saturation: Controls input video saturation by selecting values between 0 and 255. 4.4 Network IP & Port Configuration User Manual VS-103E-3GSDI – V1.0 Page 22 of 63 2/2016...
  • Page 23  RTSP Port (554, 1025 - 65535) Enter RTSP port used for RTSP-based connection. The default TRSP port is 554.  RTSP (Real Time Streaming Protocol) is a standard for media streaming between encoder and client. User Manual VS-103E-3GSDI – V1.0 Page 23 of 63 2/2016...
  • Page 24 When Zeroconf is ON, it allows the discovery of the client according to Zeroconf Protocol. WS Discovery Discovery function based on web service is enabled. It allows the discovery by the client SW which is supporting Onvif. User Manual VS-103E-3GSDI – V1.0 Page 24 of 63 2/2016...
  • Page 25  Destination IP: Set the IP Address of the Destination System which will receive MPEG- TS stream.  Destination Port: Set the Port of the Destination System which will receive MPEG-TS stream. User Manual VS-103E-3GSDI – V1.0 Page 25 of 63 2/2016...
  • Page 26 TCP/IP events asynchronously to interested clients. For Example: a router could send a message if one of its redundant power supplies fails or a printer could send an SNMP trap when it is out of paper User Manual VS-103E-3GSDI – V1.0 Page 26 of 63 2/2016...
  • Page 27 IP will be registered on the DDNS Encoder. In DHCP Mode, a dynamically assigned IP will be registered on the DDNS Encoder. Normally Check IP Disable should be unchecked in order to obtain the public IP in the network. User Manual VS-103E-3GSDI – V1.0 Page 27 of 63 2/2016...
  • Page 28 4. Remote Configuration IP Filtering IP filtering is simply a mechanism that decides which types of IP datagrams will be processed normally and which will be discarded. Email User Manual VS-103E-3GSDI – V1.0 Page 28 of 63 2/2016...
  • Page 29 The number of JPEG frames is configured appropriately. This setting is applicable only when JPEG Capture is selected.  Capture Interval Select the interval of the captured frame. User Manual VS-103E-3GSDI – V1.0 Page 29 of 63 2/2016...
  • Page 30  %ADDR: address of the encoder (Domain name when DDNS is used; otherwise IP address)  “.avi” or “.jpg” will be added automatically to the filename depending on the video file type  FTP Base Directory User Manual VS-103E-3GSDI – V1.0 Page 30 of 63 2/2016...
  • Page 31 For Example: if the upload interval is 60 sec and the upload duration is 20 sec, a video clip for 20 sec is transmitted every 80 sec. User Manual VS-103E-3GSDI – V1.0 Page 31 of 63 2/2016...

  • Page 32: Event Configuration

    4. Remote Configuration This function is applicable when the E-mail Encoder requires encryption for sending emails. 4.5 Event Configuration User Manual VS-103E-3GSDI – V1.0 Page 32 of 63 2/2016...
  • Page 33 Configure the actions when the link (connection) with peer system is disconnected. Multiple actions can be set for a single event. This event happens when the last client which has been receiving video from the video encoder loses the connection. User Manual VS-103E-3GSDI – V1.0 Page 33 of 63 2/2016...
  • Page 34 2. When selecting Editing Mode, Set includes the motion detection region cell and Erase is for excluding cells. 3. Select cells by right clicking. Multiple cells can be selected by selecting and dragging. 4. Press Apply Edit Area to save the selection. User Manual VS-103E-3GSDI – V1.0 Page 34 of 63 2/2016...
  • Page 35 4. Remote Configuration When the Encoder can detect Audio Silence, the audio silence state is delivered to the VMS as Audio Loss. User Manual VS-103E-3GSDI – V1.0 Page 35 of 63 2/2016...
  • Page 36 Set the duration of the Alarm or Beep Activation in case of an event. If Continuous is selected, the alarm will be in an active state until the operator resets it manually. User Manual VS-103E-3GSDI – V1.0 Page 36 of 63...

  • Page 37: Record Configuration

    Record is set to Use Disk. - Erase After Backup Data is deleted automatically after being uploaded to the FTP Encoder. This is valid only when Automatically Backup to FTP is selected. User Manual VS-103E-3GSDI – V1.0 Page 37 of 63 2/2016...
  • Page 38 Specify the name of the directory to be created in the FTP Encoder. This is valid only when Use Record is set to Use FTP. Checking Status of Recording Recording Status can be checked on the main view page User Manual VS-103E-3GSDI – V1.0 Page 38 of 63 2/2016...
  • Page 39 VMS/NVR) etc. When there are multiple clients and only one is disconnected, the recording is not started.  Event Type A recording is started when an Event is configured in the Event Type. User Manual VS-103E-3GSDI – V1.0 Page 39 of 63 2/2016...
  • Page 40 Once the disk initialization is finished, the disk status is shown on the Record page of the web-based setup. Refer to this chart for checking the disk status: User Manual VS-103E-3GSDI – V1.0 Page 40 of 63 2/2016...
  • Page 41 1. When selecting an AVI file, a window will appear for opening or saving the file. 2. The Save button will store the file in the PC. The AVI file can be played with Windows Media Player. User Manual VS-103E-3GSDI – V1.0 Page 41 of 63 2/2016...

  • Page 42: Device Configuration

    4. The internet connection is disabled during downloading. Two AVI files cannot be download at the same time. 4.7 Serial Device Configuration Information This information provides current serial communication status. User Manual VS-103E-3GSDI – V1.0 Page 42 of 63 2/2016...
  • Page 43 Choose Video Encoder Serial Port: RS-232 or RS-422/485; Select RS-422 or RS-485 for the RS-422/485 port. Serial Port Configuration: The Serial Port configuration is as follows (must be same as the connecting device): User Manual VS-103E-3GSDI – V1.0 Page 43 of 63 2/2016...

  • Page 44: Ptz Configuration

    Encoder or Receiver will be assigned with a unique ID. Enter the PTZ ID for control. The ID value range can be between 0 and 255.  PTZ Port Select the Serial Port for PTZ Encoder control. Preset User Manual VS-103E-3GSDI – V1.0 Page 44 of 63 2/2016...
  • Page 45 Preset Position by Event. - Edit Label: Assign a Label to the Preset Position. Only the first 15 Preset Entries can have Assigned Labels (Preset-1 - Preset-15). User Manual VS-103E-3GSDI – V1.0 Page 45 of 63 2/2016...
  • Page 46 2. Select the Modify Group button. The following window will appear. 3. Set Action, Dwell Time and Option and click Enable. 4. Press Apply button and the Group can be used on the Live View Page. User Manual VS-103E-3GSDI – V1.0 Page 46 of 63 2/2016...
  • Page 47 Pattern, Swing or Group when a specified time expires after the PTZ control is stopped. Parking Time can be set from 0 to 3600 seconds and “0” means that the Auto Parking function is turned Off. User Manual VS-103E-3GSDI – V1.0 Page 47 of 63 2/2016...

  • Page 48: User Configuration

    Live Viewing and PTZ Control Guest Live Viewing Only - Add User Press Add button. The following window will appear. Enter User ID and password (Up to 15 characters) and select Privilege Level. User Manual VS-103E-3GSDI – V1.0 Page 48 of 63 2/2016...
  • Page 49 Enter the current password and then set a new password. - Modify Privilege Level Press Modify Privilege button to change User level. It is not allowed to change the privilege level of admin user. User Manual VS-103E-3GSDI – V1.0 Page 49 of 63 2/2016...

  • Page 50: System Configuration

    DDNS Encoder, the MAC address is used in DDNS registration.  Set Current Time Display Current Date and Time  Current Domain In case the encoder is registered at DDNS Encoder, the registered domain name is displayed. User Manual VS-103E-3GSDI – V1.0 Page 50 of 63 2/2016...
  • Page 51  Backup: All the setting of configuration can be stored.  Restore: Stored configuration can be browsed and restored. The encoder is rebooted once the Config Restore button is selected. User Manual VS-103E-3GSDI – V1.0 Page 51 of 63 2/2016...
  • Page 52  Time Format Change the time format. The selectable time formats are as below; 1. YYYY/MM/DD hh:mm:ss (Eg. 2012/10.30 12:30:45) 2. DD/MM/YYYY hh:mm:ss (Eg. 10/30/2012 12:30:45) MM/DD/YYYY hh:mm:ss (Eg. 30/10/2012 12:30:45) User Manual VS-103E-3GSDI – V1.0 Page 52 of 63 2/2016...
  • Page 53 The Network Time Protocol (NTP) is a protocol for synchronizing the clocks of computer systems over packet-switched, variable-latency data networks. It is designed particularly to resist the effects of variable latency by using a jitter buffer. System ID User Manual VS-103E-3GSDI – V1.0 Page 53 of 63 2/2016...
  • Page 54 - User Defined OSD You can enter any text you like independent.  X-Coordinate or Y-Coordinate For example, if you enter 500, 500 values, OSD is placed in center of images. User Manual VS-103E-3GSDI – V1.0 Page 54 of 63 2/2016...
  • Page 55 4. Remote Configuration Language - Language Select the Language to be used for Web-Based Configuration. User Manual VS-103E-3GSDI – V1.0 Page 55 of 63 2/2016...

  • Page 56: Using The Vs-102 As A Decoder With Vs-103

    5. Using a VS-102 as a Decoder with VS-103 You can use the VS-102 as a Decoder but the Decoder will need to have V1.305R01-T660_MEI.tus firmware installed at no charge for audio on the Decoder to perform properly. User Manual VS-103E-3GSDI – V1.0 Page 56 of 63 2/2016...

  • Page 57: Vs Manager

    Once VS Manager installed, select IP Discovery, create servers. On main page go to Tools, Options and change to this path below. In the address window, after the word "Files" type a space then (x86). User Manual VS-103E-3GSDI – V1.0 Page 57 of 63 2/2016...

  • Page 58: Data Sheet

    7. Data Sheet VS-103E-HDSDI 1080p60 Full HD Video Encoder User Manual VS-103E-3GSDI – V1.0 Page 58 of 63 2/2016...
  • Page 59 7. Data Sheet User Manual VS-103E-3GSDI – V1.0 Page 59 of 63 2/2016...
  • Page 60 *Shown with optional modules installed. VS-TRM-200 Rack mount holder for 16 pcs of VS-11 VS-TRM-202 Rack mount holder for 16 pcs of VS-102 VS-TRM-204 Rack mount holder for 16 pcs of VS-14 User Manual VS-103E-3GSDI – V1.0 Page 60 of 63 2/2016...

  • Page 61: Appendix

    Relay Type Contact Rating : 1A 30VDC Switching Power : Max 30W 62.5VA Switching Voltage : Max 60VDC  Alarm Signal Output Type NO/NC Contact Signals  Connection to External Device User Manual VS-103E-3GSDI – V1.0 Page 61 of 63 2/2016...
  • Page 62 Pin No. Pin Name Description RS422 RX- RS422 RX+ RS422 TX- or RS485 TRX- It is selectable by S/W Setup RS422 TX+ or RS485 TRX+ It is selectable by S/W Setup User Manual VS-103E-3GSDI – V1.0 Page 62 of 63 2/2016...
  • Page 63 For Warranty information please refer to Marshall website page: https://marshall-usa.com/company/warranty.php Marshall Electronics, Inc. 1910 East Maple Ave. El Segundo, CA 90245 Tel: (800) 800-6608 / (310) 333-0606  Fax (310) 333-0688 www.LCDRacks.com  sales@lcdracks.com User Manual VS-103E-3GSDI – V1.0 Page 63 of 63 2/2016...

Table of Contents