Marshall Electronics VAC-12SH User Manual

Marshall Electronics
1910 East Maple Ave. El Segundo, CA 90245
Tel: (800) 800-6608 • (310) 333-0606
• Fax: 310-333-0688
www.Lcdracks.com
support@marshall-usa.com
paneL description
front paneL
1. SDI IN: 3G/HD/SD-SDI Input
2. SDI OUT: 3G/HD/SD-SDI output
rear paneL
3. Signal LED:
<Green> Both power and signal are active.
<Red> Only power is active.
4. HDMI OUT: Connect to a HDMI display with a HDMI male-male cable here.
5. +5V DC: Connect to a 5V DC power supply included.
6
Marshall Electronics
VAC-12SH
User Manual
The VAC-12SH 3G/HD/SD-SDI to HDMI Converter with Loop-out provides a
cost-effective way to convert 3G/HD/SD-SDI signal to an HDMI compliant format.
The conversion between SDI and HDMI is purely digital and guarantees no loss of
audio and video signal. Audio is supported.
* The VAC-12SH also provides two (SDI and HDMI) low jitter, re-clocked outputs
for daisy chains or multiple monitors.
*SDI supports 48KHz. Dolby True HD and DTS HD are not supported in SDI.
POWER
SIGNAL
Front
Camera
Rear
Digital SDI Cable
•
Supported high-definition (HD) formats:
NTSC 525@59.94, PAL 625@50, 720p@50,720p@59.94, 720p@60,
1080i@50, 1080i@59.94, 1080i@60, 1080p@23.97,1080p@24,
1080p@25, 1080p@29.97, 1080p@30, 1080p@50,
1080p@59.94,1080p@60
•
Bit Rate: 2.97Gbps, 2.967Gbps, 1.485Gbps, 1.4835Gbps, 270 Mbps
•
Auto 3G/HD/SD-SDI detection
•
Support HDMI Deep Color
•
One SDI compliant output and one HDMI compliant output
introduction
Device with HDMI Input
HDMI Cable
+ 5V DC
HDMI OUT
SDI IN SDI OUT
Device with SDI Inputs
Digital SDI Cable
features
3