Clarion VX402E Owner's Manual page 35

Radio Operation
3. Touch [TA] button again to set TA standby
mode OFF.
Note:
If no TP station is received, this system continues
the search operation. Performing the above
procedure again makes the "TA" go off, and stops
TP station searching.
PTY (Program Type) function
This function enables you to listen to a broadcast
of the specified program type when the
broadcast starts, even if the system operates in a
mode other than the Tuner mode.
• Some countries do not yet have PTY
broadcast.
• In the TA standby mode, a TP station has
priority over a PTY broadcast station.
Selecting PTY
1. Touch the [ ] key.
2. I f the PTY standby mode is OFF, touch [PTY]
button to set PTY standby mode ON, [PTY]
button will be lighted, and "PTY" will be
displayed at the top of the screen.
3. Touch the [PTY Select] button to display the
PTY Select screen.
4. T ouch your desired PTY preset key to select
the program type.
5. Touch [PTY Select] button to return to the
previous screen.
Changing the PTY language
]
1. Touch the [ ] key.
2. Touch the [PTY Select] key.
3. Touch the [PTY Lang.] key to display the PTY
language screen.
4. T ouch the desired Language key you wish to
set.
5. Touch the [PTY Lang.] button again to return
to the previous screen.
PTY Seek
1. Select one program type in PTY preset list
screen, then touch a seek button, the system
will start seek.
2. T ouch a Seek key.
I f touch the [ ] button, the system seeks a
PTY broadcast moving up the frequencies;
I f touch the [ ] button, it seeks moving
down the frequencies.
• I f no station with the selected PTY
broadcast can be received, the unit returns
to the previous mode.
35
VX402E/VZ402E