Advertisement
• The camera is locked onto the plate and secured.
5. Once completed, twist and lock the camera to the base plate; a click is heard when the camera is locked.
6. Observe the status LED on the left side of the camera lens assembly and ensure the camera is connected via Ethernet (solid green) or WiFi (solid blue). An
MV must first be provisioned over a wired Ethernet connection before it can be deployed wirelessly. See the setup guide here for information on how to connect
via WiFi.
MV63 LED Status Indicator
Your MV63 series is equipped with an LED light on the front of the unit to convey system functionality and performance information.
The following colours and patterns indicate the various status conditions of an MV:
•
Rainbow (solid, rotating through colours) - MV is booting up.
•
Flashing Blue - MV is searching for WiFi network(s).
•
Flashing Green - MV is upgrading or initialising for the first time.
•
Solid Green - MV is connected via Ethernet.
•
Solid Blue - MV is connected via WiFi.
•
Solid Violet - MV has audio recording enabled.
•
Solid Amber - MV is not able to connect to the Dashboard.
16
Advertisement
