3> When the computer detects that <Alt> or <Ctrl> and <E> keys are pressed, you see the following
messages and the menu.
4> A FC controller listing is displayed, and you can confirm WWPN address.
5> If you have finished to confirm all WWPN addresses, enter "ESC" (Exit) to exit the menu. Then enter
"Y" to reboot the computer.
Port1
Port0
If the above menu is not displayed and the window has gone to the next
one, press <Alt>, <Ctrl> and <Del> keys simultaneously to reboot the
computer. Then, start the steps from the beginning.
The LPe16002B of Function "00" is Port0 and Function "01" is Port1.
The above message sample is just for your reference. Some of them may
be different depending on the computer or its configurations.
WWPN address