Table of Contents
Advertisement
HEIGHT POSITIONING
Determine the height of the head units. At least one of the two lenses should be
at the same height of the face of the rear bumper. An average height rear bumper
for most passenger cars up to standard size two-wheel drive pickup trucks is 20 to
22 inches from the floor to line "C" on the Mounting Template.
For suggested height placements to line "C", for 2 or more vehicle systems, see
Height Chart below:
Multiple Passenger Cars
Passenger Cars and Mini Vans
Passenger Cars and SUVs
Passenger Cars and Standard Size 2WD Pickup Trucks
Mini Vans and SUVs
Mini Vans and Standard Size 2WD Pickup Trucks
SUVs and Standard Size 2WD Pickup Trucks
Multiple Standard Size 2WD Pickup Trucks
* The Height Chart above is for most vehicle combinations. In cases that
involve bumper heights of more than 22 inches from the ground to the
bottom of the bumper may require special adjustments to the positioning
or may require an additional set of Infrared Head Units.
After the height and the distance from the garage door is determined, you can
now mark the height on the mounting walls and intersect that mark with a
distance mark by extending a line upward from the distance mark you previously
marked on the floor. (See Figure 3)
You are now ready to mount the Infrared Head Units.
HEIGHT CHART
20 Inches
20 Inches
21 Inches
22 Inches*
21 Inches
22 Inches*
22 Inches*
24 Inches*
Advertisement
Table of Contents
