Setting The Voice Mail Tone - Panasonic KX-TG2553 Operating Instructions Manual

To erase a stored number
Press and hold
(CLEAR)
•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).

Setting the Voice Mail Tone

If your voice mail service sends a voice mail tone after a new message has
been recorded, set to "On". "Voicemail" and "
the VOICE MAIL indicator on the base unit will flash when a message has
been recorded in your mailbox. You will hear a series of voice mail tones
followed by a dial tone after pressing
(Contact your service provider for details about your service.)
Set to "Off" if:
—you do not subscribe to a voice mail service,
—your voice mail service does not send a voice mail tone, or
—the unit is connected to a PBX.
Your phone comes from the factory set to "On".
Make sure the handset is in the standby mode initially.
1 Press
(FUNCTION/EXIT/CH)
2 Press or
Ö
points to "Program".
Press
3
FWD/EDIT á
Press or
4
Ö
points to "Voicemail tone".
5 Press
FWD/EDIT á
6 Press or
Ö
Press
FWD/EDIT á
•A beep sounds.
•To return to the standby mode, press
(FUNCTION/EXIT/CH).
•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
in step 4 on page 40.
.
repeatedly until the arrow
Ñ
(Yes key).
repeatedly until the arrow
Ñ
(Yes key).
to select "Off" or "On".
Ñ
(Save key).
" will be displayed and
.
(TALK)
H
Program
GF
Save mailbox#
H
Voicemail tone
GF
Voicemail tone
GF
Voicemail tone
H
=Yes
H
=Yes
:On
H
=Save
:Off
41