Table of Contents
Advertisement
Before Requesting Help
Problem
You cannot program items,
such as the dialing mode.
Previously programmed
information is erased.
You cannot store a name
and phone number in the
directory.
While programming or
searching, the unit starts to
ring and stops the program/
search.
The unit does not display the
caller's name and/or phone
number.
The display goes to the
standby mode while viewing
the Caller List.
52
Remedy
•Programming is not possible while the
unit is in the talk mode or when viewing
the Caller List/directory list.
•Do not pause for over 60 seconds while
programming.
•Move closer to the base unit.
•Make sure that the unit is in the standby
mode.
•If a power failure occurs, programmed
information may be erased. Reprogram
if necessary.
•You cannot store an item in the directory
while the unit is in the talk mode.
•Do not pause for over 60 seconds while
storing.
•To answer the call, press
again from the beginning after hanging
up.
•You need to subscribe to a Caller ID
service from a telephone company.
•Other telephone equipment may be
interfering with your phone. Disconnect
it and try again.
•Other electrical appliances connected to
the same outlet may be interfering with
the Caller ID information.
•Telephone line noise may be affecting
the Caller ID information.
•Do not pause for over 60 seconds while
searching.
. Start
(TALK)
Advertisement
Table of Contents
