Table of Contents
Advertisement
Select the number of rings by pressing [d] or
5
[B].
• You can also select the number of rings by
pressing [0] (Toll saver*), or [2] to [7].
Press the soft key (Save), then press [OFF].
6
*Toll saver
When you call the unit from a remote operation, the number of rings will tell you
if there are any new messages. If the unit answers on the 2nd ring, there is at
least one new message. If the unit answers on the 4th ring, there are no new
messages. To save the toll charges for the call, hang up immediately when you
hear the 3rd ring. The 3rd ring indicates that there are no new messages.
Recording Mode
Two recording modes are available. The factory preset is "Standard recording
(16min)", which provides more recording time (16 min) and standard sound quality.
"Enhanced recording (8 min)" provides less recording time (8 min) but clearer
sound quality.
Press [MENU].
1
Scroll to "Initial setting" by pressing [d]
2
or [B], then press the soft key (Select).
Press the soft key (Select) at "Set
3
answering".
Scroll to "Recording mode" by pressing [d]
4
or [B], then press the soft key (Select).
Select the recording mode by pressing [d] or
5
[B].
• You can also select the recording mode by
pressing [1] (Standard) or [2] (Enhanced).
Press the soft key (Save), then press [OFF].
6
For assistance, please call: 1-800-211-PANA(7262)
Preparing the Answering System
Handset
Number of rings
:4
Back
Save
K
dB
Initial setting
Back
Select
K
dB
Set answering
Back
Select
K
dB
Recording mode
Back
Select
K
dB
Standard
recording(16min)
Back
Save
K
dB
L
L
L
L
L
27
Advertisement
Table of Contents
