Table of Contents
Advertisement
Connect ing a DVD player
(cont inued)
(Pow er)
When your DVD player has st ereo
analog out put s
Be sure to match the color of the plugs and
the connectors. Connect the LINE OUT
(audio) output jack of your DVD player to the
FRONT jacks of DVD INPUT with the audio
connecting cable. To listen to the sound from
the connected DVD player, press DVD 5.1CH
until "DVD" appears in the display.
Not es
• Each time you press DVD 5.1CH, the function
changes as follows.
DVD 5.1CH
• You cannot enjoy the 5.1 channel surround sound
if you connect a DVD player which does not have
the 5.1 channel analog outputs.
• If there is no sound when you connect a DVD
player which has 5.1 channel analog outputs,
connect the LINE OUT (audio) output jacks of
your DVD player to the MD IN jacks, then change
the function to MD by pressing FUNCTION.
48
Downloaded from:
DVD 5.1CH
˜
DVD (2 channel)
https://www.usersmanualguide.com/
Conne ct ing e xt e rna l
ant e nnas
Connect the external antenna to improve the
reception. Refer to the instructions of each
component.
FM ant enna
Connect the optional FM external antenna.
You can also use the TV antenna instead.
Jack t ype A
75-ohm coaxial cable
(not supplied)
Jack t ype B
IEC st andard socket
connect or
(not supplied)
Advertisement
Table of Contents
