Lcd Contrast - Panasonic KX-TG2356 Operating Instructions Manual

Base unit ringer tone
(use either the handset or the base unit)
Base Unit
Make sure the base unit is not being used.
Press VOLUME [<] or [>], then select the desired ringer tone by pressing
[1] to [7].
[1] to [3] : Bell ringer patterns
• After pressing VOLUME [
tone.
• The base unit will ring and the ringer tone will change.
• To stop ringing, press [STOP].
Setting the base unit ringer tone by using the
Press [MENU].
1
2 Scroll to "Initial setting" by pressing [d] or [B], then press
Select.
Scroll to "Set base unit" by pressing [d] or [B], then press Select.
3
Press Select at "Ringer tone".
4
Follow steps 4 and 5 of "Handset ringer tone" on page 18.
5
• When selecting the ringer tone, the base unit will ring. If the base unit ringer
volume has been turned off, the base unit will not ring (p. 18).

LCD Contrast

There are 6 levels of LCD contrast. The factory preset is "level 3".
Press [MENU].
1
Scroll to "Initial setting" by pressing [d]
2
or [B], then press Select.
Scroll to "LCD contrast" by pressing [d] or
3
[B], then press Select.
Select the desired contrast by pressing [d] or
4
[B].
• The contrast will change.
Press Save, then press [OFF].
5
For assistance, please call: 1-800-211-PANA(7262)
Programmable Settings
[4] to [7] : Melody patterns
] or [ ], the base unit will ring using the current ringer
< >
Handset
Handset
Initial setting
Back Select
K dB
LCD contrast
Back Select
K
dB
Ex. Level 3
LCD contrast
Low High
Back Save
K dB
L
L
L
19