Table of Contents
Advertisement
FAQs
Before requesting service or assistance, please follow these simple guides to resolve the problem.
If the problem still persists, please contact your local Panasonic dealer for assistance.
White spots or shadow images (noise)
Check the position, direction, and connection of
●
the aerial.
Neither image nor sound is produced
Is the TV in "AV mode"?
●
Is the mains lead plugged into the socket outlet?
●
●
Is the TV turned On?
Check the Picture Menu (p. 24 - 25) and
●
volume.
Check all required cables and connections are
●
firmly in place.
An error message appears
Follow the message's instructions.
●
If the problem persists, contact your local
●
Panasonic dealer.
The LCD panel moves slightly when it is
pushed with a finger Clattered sound might
be heard
There are some looseness around the panel to
●
prevent the damage to the panel.
The panel might move slightly when it is pushed
with a finger, and clattered sound might be
heard. This is not a malfunction.
Problem
Chaotic image, noisy
No image can be
displayed
Blurry or distorted
image
(no sound or low
volume)
Unusual image is
displayed
[Shop] appears on
screen at switch on
No sound is produced
Sound level is low
or sound is distorted
There may be red spots, blue spots, green
spots and black spots on the screen
This is a characteristic of liquid crystal panels
●
and is not a problem. The liquid crystal panel is
built with very high precision technology giving
you fine picture details.
Occasionally, a few non-active pixels may
appear on the screen as a fixed point of red,
green, blue or black.
Please note this does not affect the
performance of your LCD, and it is not a quality
problem.
Change the setting of [P-NR] in the Picture Menu (to remove noise).
●
(p. 24)
Check nearby electrical products (car, motorcycle, fluorescent lamp).
●
Is [Colour] or [Contrast] in the Picture Menu set to the minimum?
●
(p. 24)
Reset channels
(p. 32 - 33)
●
Turn the TV Off with Mains power On / Off switch, then turn it On
●
again.
[Shop] was selected in [Auto Tuning] (p. 12)
●
●
Reset settings in [Shipping Condition] (p. 36), then select [Home] in
[Auto Tuning]
(p. 12)
Is "Sound Mute" active? (p. 11)
●
Is the volume set to the minimum?
●
Sound signal reception may be deteriorated.
●
●
Set [MPX] in the Sound Menu to [Mono] (p. 27).
Actions
71
Advertisement
Table of Contents
