Table of Contents
Advertisement
Setup the wireless LAN connection
Setup the wireless LAN connection to enable the network service functions.
To setup the wireless LAN connection, the wireless LAN Adaptor (optional accessory) is required.
●
For the information about the Wireless LAN adaptor
Confirm the encryption key, settings and positions of your access point before starting setup.
●
For details, read the manual of the access point.
Please note that this TV does not support wireless public access points.
●
Connect the Wireless LAN Adaptor to the USB 1 or 2 port
1
Internet environment
Access point
Select [Yes]
2
Start wireless LAN connection setup?
Yes
Please connect the wireless LAN adaptor to a USB terminal.
Select the connection type
3
Connection Type
Please select network connection type.
WPS(Push button)
Search for access point
■
[WPS(Push button)]
WPS(Push button)
1) Please press the 'WPS' button on the access
1) Please press the 'WPS' button on the access
point until its light flashes.
point until its light flashes.
2) When the light is flashing select 'Connect' on
2) When the light is flashing select 'Connect' on TV.
TV.
If you are unsure, please check the instruction
If you are unsure, please check the instruction
manual of the access point.
manual of the access point.
Connect
■
[Search for access point]
Access points found automatically are listed.
Available Access Points
No.
SSID
1
Access Point A
2
Access Point B
3
Access Point C
Encryption Key Setting
Connection will be made with the following settings:-
SSID : Access Point A
Authentication type : WPA-PSK
Encryption type : TKIP
Please input the encryption key.
Encryption key
Access Point Settings
Encryption key
A B C D E F G H
I
J K L M N
U V W X Y Z
0 1 2 3 4 5 6
a b c d e
f
g h
i
j
u v w x
y
z
(
)
+
-
Access Point Settings
Encryption key is set to:-
XXXXXXXX
Select 'Yes' to confirm.
Select 'No' to change.
Yes
Wireless LAN connection setup is completed
If failed, check the encryption key, settings or positions of your access point.
●
(
Read the manual of the access point.)
If connection to the access point is successful, we recommend you perform the [Connection
●
Test] (p. 51).
No
Press the WPS button on the access point until the light flashes.
And then, press the OK button to connect the Wireless LAN
Adaptor and the access point.
Ensure that your access point supports WPS for this method.
●
WPS: Wi-Fi Protected Setup™
●
1
Select your desired access point
Wireless type Encrypt
Reception
11n(2.4GHz)
11n(5GHz)
11n(5GHz)
2
Access the encryption key input mode
If the selected access point is not encrypted, the confirmation
●
screen will be displayed. It is recommended to select the
encrypted access point.
3
Enter the encryption key of the access point
(Set characters one by one)
O P Q R S T
7 8 9
!
:
#
k
l m n
o p q
r
s
t
.
*
_
You can set characters by using numeric buttons.
●
4
Select [Yes]
To re-enter the encryption key, select [No].
●
No
"Optional accessories" (p. 8)
Wireless LAN Adaptor
(optional accessory)
select
confirm
If your access point supports WPS (Push
●
select
button), then select this option. If not,
select [Search for access point].
confirm
select
To search access points again
●
For information of the
●
access
highlighted access point
Store
select
RETURN
set
select
set
Y
INFO
13
Advertisement
Table of Contents
