Table of Contents
Advertisement
Item
Audio Selection
Subtitle
Subtitle text
Aspect Change
Audio output Settings
You can enjoy the multi-channel sound via an amplifier connected to the DIGITAL AUDIO OUT terminal.
To confirm or change the current sound status
●
1
Display the menu
MENU
Item
SPDIF Selection
Adjustments / Configurations (alternatives)
Allows you to select between selectable sound tracks (if available)
It may take several seconds to change the sound.
●
Turn the subtitle on / off and select subtitle file (if available)
[Off] / [Subtitle 1] (/ [Subtitle 2] ...)
Selects the font type, if the subtitles text are not displayed correctly.
[Latin1] / [Latin2] / [Cyrillic] / [Turkish] / [Unicode] / [Chinese1] /
[Chinese2]
Some subtitles text may not be displayed correctly.
●
[Aspect1]: Displays the content full-screen
[Aspect2]: Displays the content square
[Original]: Displays the content original size
You can also change the aspect using the ASPECT button.
●
Aspect change may not work depending on the content.
●
2
Select [Sound]
Main Menu
Picture
Sound
Setup
select
access
Adjustments / Configurations (alternatives)
SPDIF : A standard audio transfer file format
Selects the initial setting for digital audio output signal from the DIGITAL
AUDIO OUT terminal [Auto] / [PCM]
[Auto] : Dolby Digital is output as Dolby Digital Bitstream. MPEG is output as
PCM.
[PCM] : Digital output signal is fixed to PCM.
"Confirm or change the current status" (p. 44)
3
Select [SPDIF Selection] and set
Sound Menu
Mode
Balance
Headphone Volume
Surround
Auto Gain Control
Volume Correction
Speaker Distance to Wall
SPDIF Selection
Reset Sound Default
Normal
Off
Off
Over 30cm
Auto
Reset
select
set
45
Advertisement
Table of Contents
