Programmable Functions - Panasonic KX-TG2267B Operating Instructions Manual

Programmable Functions

You can program the following function items using the handset near
the base unit. The display shows the programming instructions. See the
corresponding pages for function details. Make sure the unit is not
being used and the handset is lifted off the base unit.
Press
(HOLD/FUNCTION/CLEAR)
<Function menu>*
--------------
H
Save directory
Ringer volume
Ringer tone
Program
--------------
Press .
á
<Function menu>*
--------------
H
Set flash time
Save VM acces#
VM tone detect
Set line mode
Set dial mode
Line selection
Incoming call.
Auto talk
CallerID edit
LCD contrast
--------------
During programming:
*To select a desired function item, scroll through the items by pressing
Then press
á
•"--------------" indicates the beginning or end of the function menu
•You can exit the programming mode any time by pressing
•If you do not press any buttons for 60 seconds, the unit will exit the programming
mode.
•If the handset has lost communication with the base unit, 3 beeps sound and "No
link to base Place on cradle and try again." is displayed.
18
To store an item in the directory (p. 37).
To select the ringer volume (p. 20).
To select the ringer tone (p. 21).
To select the flash time (p. 53).
To store a voice mail access number (p. 44).
To set the voice mail tone detection(p. 46).
To select the line mode (p. 17).
To select the dialing mode (p. 16).
To change the line selection (p. 54).
To set the incoming call tone (p. 55).
To set the Auto Talk feature (p. 19).
To set the Caller ID Number Auto Edit feature (p. 33).
To select the LCD contrast (p. 22).
to go to the next step.
.
or
Ö
.
.
(OFF)
.
Ñ