Panasonic KX-TG2248S Operating Instructions Manual page 23

To dial after confirming the
entered number
1
Enter a phone number.
3334444
Clear
• If you misdial, press Clear. Enter
the correct number.
• If a pause is required for dialing,
press Pause where needed
(p. 38).
• To cancel, press [OFF].
2
Press [ ] or [
3
To hang up, press [OFF] or
place the handset on the base
unit.
If noise interferes with the
conversation
Have the unit select a clearer
channel by doing one of the
following:
Press [ ] (Channel) if talking
using [ ],
press [ ] (Channel) if talking
using [ ], or
press CH, which is displayed when
you adjust receiver or speaker
volume (p. 24).
OR
Walk closer to the base unit.
To redial the last number
dialed
Press [ ] or [
[REDIAL].
For assistance, please call: 1-800-211-PANA(7262)
Pause
].
], then press
Making Calls
To redial using the redial
list (Memory Redial)
The last 5 phone numbers dialed with
the handset are stored in the redial list.
1
Press [REDIAL].
333-4444
Exit
• The last number dialed is
displayed.
2
Scroll to the desired number by
pressing [ ] or [ ].
• You can also scroll through the list
by pressing [REDIAL].
• To exit the list, press [OFF] or
Exit.
3
Press or
[ ] [
• To erase an item, scroll to the
desired item then press Erase.
• If "No items stored" is displayed,
the list is empty.
To put a call on hold
Press Hold during a conversation.
Talk
(VE)
• "Hold" is displayed.
• To page the base unit while holding,
press Intercom (Intercom hold).
To return to the call, press [
[ ].
• If another phone is connected on the
same line, you can also return to the
call by lifting its handset.
• If a call is kept holding for 6 minutes,
an alarm tone will start to sound. After
4 additional minutes on hold, the call
will be disconnected.
• The alarm volume corresponds to the
ringer volume level (p. 17). If the
ringer is OFF, the alarm will sound at
the LOW level.
Erase
.
]
00-00-08
Hold
] or
23