Panasonic KX-TG2239B Operating Instructions Manual page 62

Troubleshooting
Problem
You cannot program items,
such as the dialing mode.
Previously programmed
information is erased.
You cannot store a name
and phone number in the
directory.
While programming or
searching, the unit starts to
ring and stops the program/
search.
The unit does not display the
caller's name and/or phone
number.
62
Remedy
•Programming is not possible while the
unit is in the talk or speakerphone mode,
when viewing the Caller List/directory list.
•Do not pause for over 60 seconds while
programming.
•Move closer to the base unit.
•
, , or
Ö Ñ Ü á
pressed when you picked up the
handset. Press
•If a power failure occurs, programmed
information may be erased. Reprogram
if necessary.
•You cannot store an item in the directory
while the unit is in the talk, speaker or
intercom mode or while storing phone
numbers in the base unit.
•Do not pause for over 60 seconds while
storing.
•To answer the call, press
Start again from the
.
(SP-PHONE)
beginning after hanging up.
•You need to subscribe to a Caller ID
service.
•Other telephone equipment may be
interfering with your phone. Disconnect
it and try again.
•Other electrical appliances connected to
the same outlet may be interfering with
the Caller ID information.
•Telephone line noise may be affecting
the Caller ID information.
may have been
and try again.
(OFF)
,
or