Panasonic KX-TG2237S Description

This document is a text description of the control panel
layout for the product listed below.
"PDF" files of the complete operating instructions are
available from the Customer Support section of
www.Panasonic.com.
If you need the operating instructions in an alternate
format, please request it from Customer Support.
Model Number KX-TG2237S
2.4GHz Digital Cordless Phone
Handset
With the handset facing you, the antenna is a narrow 2 inch long protrusion at the top right. Just below the
top on the front of the handset is a shallow oval concave. This is the earpiece. The smooth surface below
the earpiece is the display. Immediately below the display are three buttons: the left one is the
FUNCTION button, the middle one is the MUTE button and the right one is the CALLER IQ button. In
the center below these buttons is the NAVIGATOR control, which is a large rectangular control with four
active areas. The active areas are the 12 o'clock, 3 o'clock, 6 o'clock and 9 o'clock positions. The 12 and 6
o'clock positions are the UP and DOWN keys respectively. These are also the volume control up and
down keys. The 3 and 9 o'clock positions are the right and left arrow keys. These are also the EDIT and
CH keys respectively.
To the upper left of the NAVIGATOR control, an oval button with a clipped edge is the TALK button.
The oval button below the TALK button is the SPEAKERPHONE button. To the upper right of the
NAVIGATOR control, an oval button with a clipped edge is the OFF button. The oval button below the
OFF button is the HOLD button. The HOLD button is also the INTERCOM or CLEAR button.
Below these buttons is the telephone keypad laid out in the conventional telephone arrangement with a
"nib" on the 5 button. On the lower left below the keypad is the FLASH button. The FLASH button is
also the CALL WAIT or VOICE MAIL button. On the lower right of the keypad is the REDIAL button.
The REDIAL button is also the PAUSE button.
The indentation between the FLASH and REDIAL button is the microphone.
The 2 metal ridges at the bottom of the handset are the charge contacts.
The headset jack is on the left side of the handset, at almost the same height as the top row of the buttons.
It has a rubber cover that can be opened by pulling down, and is not removable.