Listening To Voice Mail Messages - Panasonic KX-TG2239B Operating Instructions Manual

Voice Mail Service

Listening to Voice Mail Messages

After the voice mail box has received messages, the unit will indicate it in
two ways: (a) "Voice mail" displayed on the handset, and (b) the VM
indicator on the base unit will flash.
To listen to your voice mail message(s), follow the steps below.
Handset
1 Press
(FLASH/CALL!WAIT/VOICE!MAIL)
•The unit is connected to the telephone line and dials the access number (p. 50).
Follow the pre-recorded instructions.
2
When finished, press
3
Base unit
1 Press
(VM)
•The unit is connected to the telephone line and dials the access number (p. 50).
2 Follow the pre-recorded instructions.
3 When finished, press
•If "Voice mail" still remains on the display or the VM indicator still flashes even
if you have listened to your voice mail message(s), press (FUNCTION), and
press and hold (HOLD/INTERCOM/CLEAR) until the unit beeps. "Voice mail"
will disappear and the VM indicator will turn off.
•If your voice mail service uses a voice mail tone and the recorded message is
over 3 minutes long, "Voice mail" may not be displayed and the VM indicator
may not flash.
•If your voice mail service uses a voice mail tone, the tone will be heard from any
parallel connected phone. If you use another phone to retrieve messages, you
have to dial your access number manually.
52
(OFF)
.
(SP-PHONE)
, and press
.
.
or .