Table of Contents
Advertisement
Special Features
Using the PAUSE Key
(For PBX Line/Long Distance Calls)
We recommend you press Pause or P if a pause is
required to dial with a PBX or to make a long distance call.
Ex. Line access number [9] (PBX)
[9]
Pause or P
• Pressing Pause or P once creates a 3.5 second pause.
This prevents misdialing when you dial after confirming
the entered number (p. 19) or dial a stored number (p. 32).
• Pressing Pause or P more than once increases the length of the pause between
numbers.
FLASH Button
Pressing [FLASH/CALL WAIT] allows you to use special features of your host PBX
such as transferring an extension call, or access optional telephone services such
as call waiting.
• Pressing [FLASH/CALL WAIT] cancels the following operations:
— temporary tone dialing, or
— muting your conversation.
Selecting the flash time
The flash time required depends on your telephone exchange or host PBX.
You can select the following flash times: "700, 600, 400, 300, 250, 110, 100 or
90 ms (milliseconds)". The factory preset is "700 ms".
• If PBX functions do not work correctly, consult your PBX supplier for the correct
settings.
1
Press [MENU].
2
Scroll to "Initial setting" by pressing [ ]
or [ ], then press Select.
3
Scroll to "Set tel line" by pressing [ ] or
[ ], then press Select.
4
Scroll to "Set flash time" by pressing [ ]
or [ ], then press Select.
5
Select the desired time by pressing [ ] or [ ].
6
Press Save, then press [OFF].
40
Phone number
Handset
Base Unit
Handset
Handset
Example
9P15556667777
Clear
OR
9P1234567890
=Next
Initial setting
Exit
Select
Set tel line
Back
Select
Set flash time
Back
Select
Set flash time
Back
Pause
P
:700ms
Save
Advertisement
Table of Contents
