Way Led And 1 Way Remote Button Functions - CompuSTAR Pro system User Manual

2 Way LED and 1 Way Remote Button Functions

Button
0.5 seconds
3.5 seconds
0.5 seconds
0.5 seconds
2.5 seconds
0.5 seconds
2.5 seconds
0.5 seconds
2.5 seconds
0.5 seconds
2.5 seconds
0.5 seconds
2.5 seconds
0.5 seconds
0.5 seconds
0.5 seconds
2.5 seconds
If you would like additional information on the functionality of your 1-way companion remote, please visit
the support page at www.compustar.com
Additional
Duration Programming
Required
no
no
no
no
no
no
no
no
no
no
no
Option 1-9
no
no
Option 2-6
Option 2-2
no
to download the full user manual.
Function / Description
Lock/Arm
Unlock/Disarm
Aux 1. Triggers the auxiliary 1 output (most commonly used for rear defrost or window
roll-down).
Trunk pop. Triggers the trunk release output and opens the vehicles trunk.
Aux 2. Triggers the auxiliary 2 output (most commonly used for rear defrost or window
roll-down).
Activates the remote start. Repeat and remote start will shut off.
Turns siren on/off (Note: With the siren off, it will still sound in the event the alarm is
triggered).
Option programming menu 1 - Installers Only.
Valet mode (see page 5 for details)
Turns the shock sensor on/off.
Drive lock. Activates ignition controlled door locks.
Option programming menu 2 - Installers Only.
Activates passive arming (vehicle will arm/lock 30 seconds after the vehicle is disarmed)
Activates timer start mode. Timer start mode has multiple programmable settings:
duration settings, temperature settings and self start settings.
Activates the built-in Turbo timer function. Additional installation is required when using
this feature on automatic transmission vehicles.
Car Check (updates vehicle status on remote pager) / Secure Auxiliary
6