Using Your Lumea Series 9900 Before And After Tanning; Traveling With The Device - Philips Lumea 9900 Series Manual

Using your Lumea Series 9900 before and after
tanning
Tanning with natural or artificial sunlight
Tanning with creams

Traveling with the device

-
The Slide & Flash mode offers convenient use on larger areas like legs. Keep
the flash button pressed while you slide the device over your skin to release
several flashes in a row.
Intentionally exposing your skin to natural or artificial sunlight with the aim of
developing a tan influences the sensitivity and color of your skin. Therefore the
following is important:
-
After each treatment, wait at least 48 hours before tanning. Even after 48
hours, make sure that the treated skin does not show any redness from the
treatment anymore.
-
If you expose your skin to the sun (without tanning intentionally) in the 48
hours after treatment, use a sunblock SPF 50 on the treated areas. After this
period, you can use a sunblock SPF 50 for two weeks.
-
After tanning, wait at least 2 weeks before you use Lumea and perform a
skin test. This is to determine the appropriate light intensity setting (see 'B
Test skin 24 hours before treatment').
-
Do not use Lumea on sunburned body areas.
Note: Occasional and indirect sun exposure does not qualify as tanning.
If you have used an artificial tanning lotion, wait until the artificial tan is
completely gone before you use the device.
When you travel with the device, check with the airplane carrier to confirm that
the device can be carried and/or used on the airplane.
English
23