Table of Contents
Advertisement
3. Touch the Delay Start
until the display shows
goes off.
4. Touch the Start/Pause
the programme immediately.
Changing the delay start after the countdown
has started
To change the delay start:
1. Touch the Start/Pause
appliance. The related indicator flashes.
2. Touch the Delay Start
until the display shows the desired delay time.
3. Touch the Start/Pause
the new countdown.
THE AUTOADJUST SYSTEM LOAD
DETECTION
After touching the Start/Pause
1. The AutoAdjust System starts estimating the
weight of the load to calculate the real
programme duration. During this phase the
FlexiTime bars
digits play a simple animation.
2. After about 15-20 minutes the Time Manager
bars disappear and new cycle duration is
displayed.
The appliance automatically adjusts the
programme duration to the load to achieve
perfect washing results in the minimum
possible time.
The AutoAdjust System is not available
with all programmes such as :Wool,
Rinse, Spin and programmes with
short cycles.
INTERRUPTING A PROGRAMME AND
CHANGING THE OPTIONS
When the programme is running, you can change
only some options:
1. Touch the Start/Pause
The related indicator flashes.
2. Change the options. The given information in
the display changes accordingly.
3. Touch the button Start/Pause
The washing programme continues.
CANCELLING A RUNNING PROGRAMME
1. Press the button ON/OFF to cancel the
programme and to deactivate the appliance.
20
button repeatedly
and the indicator
button again to start
button to pause the
button repeatedly
button again to start
button:
placed below the time
button.
again.
2. Press the button ON/OFF again to activate the
appliance.
If the AutoAdjust System has
completed and the water filling has
already started, the new programme
starts without repeating the
AutoAdjust System. The water and
the detergent are not drained out in
order to avoid waste.
There is also an alternative way of cancelling:
1. Rotate the selector knob to the "Reset" position
.
2. Wait for 1 second. The display shows
Now, you can set a new washing programme.
OPENING THE DOOR - ADDING GARMENTS
If the temperature and level of the
water in the drum are too high and/or
the drum is still rotating you should not
open the door.
While a programme or the delay start operates, the
appliance door is locked. The display shows the
indicator
.
1. Touch the Start/Pause
In the display the related door lock indicator goes
off.
2. Open the appliance door. If necessary, add or
remove the items. Close the door and touch
the Start/Pause
The programme or the delay start continues.
END OF THE PROGRAMME
When the programme has finished, the appliance
stops automatically. The acoustic signals operate (if
they are active). The display shows
The indicator of the Start/Pause
off.
.
button.
button.
button goes
Advertisement
Table of Contents
