Download Print this page

SC&T HE05B Series Manual

Hdmi over ip (with rs232, ir, analog audio)

Advertisement

Quick Links

HDMI over IP (with RS232, IR, Analog Audio) Series
ITEM NO: HE05BT HDMI over IP - Transmitter
HE05BER HDMI over IP - Receiver
HE05BR HDMI over IP with RS232, IR, Analog Audio
HE05B series products are Multicast HDMI video over an IP network to over 254 screens for faster, more
efficient HD content sharing and distribution. It is ideal for distributing digital signage content or other HD
video and audio across an Ethernet network. Because the transmitter and receivers install directly into your
existing LAN infrastructure, integration is easy.
It works in point-to-point or point-to-multipoint and multipoint to multipoint configurations. Built in window
based management software, easy to use computer to setup transmitter/receiver linking and transmission.
It is perfect application for any digital signage application with screens in different buildings or stores, such
as distributing high-quality medical imaging video across a hospital campus, streaming video to classrooms
in schools, multicasting video in command and control room setups, corporate video sharing and training.
Features:
Extend HDMI, RS232, IR signals over one CAT5e/CAT6 cable.
Supports resolutions up to 1080p Full HD @ 60 Hz
Transmission range up to 150M over CAT5e, 180M over CAT6.
Supports 2-way RS232 commands at baud rate 115200 (control software on a PC, or other automated control
system hardware) to control devices attached to the matrix using RS232. Full Duplex data communication.
HDMI 1.3b and HDCP compliant.
HDMI audio support up to LPCM 7.1@192Khz
Built in Bi-Directional analog audio transmission (only in point to point mode).
Built in Bi-Directional IR.
Use IGMP and Jumbo frame protocol Gigabit Switch Hub to do HD signal distribution and transmission.
Support window based management software, using PC computer for easy setting input/output link.
Support Android/iOS APP control.
Receiver input source select could be from IR remote control or front panel button.
HE05BT transmitter unit built in HDMI loop output.
Support point to point and multiple source devices to multi-display connections via Gigabit network switch.
Perfect for large scale remote HD content access and security monitoring systems, digital signage applications.
Optional model:
SR01: Signal repeater for longer distance application.
IRM01: Programmable IR module for HE05BR, HKM01BR, VDKM01BR receiver which allow using IR remote
control to do IR/RS232 command.
HDMI Over IP Series :
ITEM NO.
Video Interface
HE05BT
HE05BR
HE05BER
Resolution
HDMI
1080p
HDMI
1080p
HDMI
1080p
TX
RX
USB
RS232
V
V
V
V
V
Receiver
IR
Audio
IR Control
V
V
V
V
V
V
V

Advertisement

loading
Need help?

Need help?

Do you have a question about the HE05B Series and is the answer not in the manual?

Questions and answers

Summary of Contents for SC&T HE05B Series

  • Page 1 HE05BR HDMI over IP with RS232, IR, Analog Audio Receiver HE05B series products are Multicast HDMI video over an IP network to over 254 screens for faster, more efficient HD content sharing and distribution. It is ideal for distributing digital signage content or other HD video and audio across an Ethernet network.
  • Page 2 Installation View: Multiple Transmitters to Multiple Receivers Connection: (Matrix Switcher) Point to Point Direct Connection: (Extender)
  • Page 3 One Transmitter to Multiple Receivers Connection: (Splitter) Multiple Transmitters to One Receiver Connection: (Switcher)
  • Page 4 Optional Model: (order separately) SR01 Signal Repeater Extend data signal for an additional 120meters.  Application for HKM01B,DKM01B,VKM03B signals for extra long range transmission.  Ability to cascade connection with multiple SR01 for long range transmission  Built in LED status indication. ...
  • Page 5: Led Indication Status

    Panel View: Transmitter HE05BT Receiver HE05BR HE05BER LED Indication Status: Power (Green LED): Flash Booting Boot completed Link (Blue LED): Flash Connecting or connected but no HDMI input Transmitter connected with Receiver RJ45 LED: Green Flash Data transmission Orange On Ethernet connected Receiver IR (Red LED): Received IR signal...
  • Page 6 Back Panel Rotary Switch Function: HE05BT and HE05BR must setting at same channel in order to do mutual transmission. Rotary switch to be follow 16 HEX, could switch “ 0 ~ F “ total 16 channels, A = channel 10, B = channel 11, others channel same as 16 hex conversion.
  • Page 7: System Default Settings

    RJ45 pin define: Link Cable (TIA/EIA-568-B) 1. Orange-white Data 1 + 2. Orange Data 1 - 3. Green-white Data 2 + 4. Blue Data 3 + 5. Blue-white Data 3 - 6. Green Data 2 - 7. Brown-white Data 4 + 8.
  • Page 8 Bandwidth Chart: The bandwidth will be varied based on different resolution. Higher resolution may not request bigger bandwidth. Below Chart is the resolution and bandwidth status for reference. Resolution (@60Hz) Average Bandwidth (Mbps) 1080p 77 (24 ~ 91) 720p 46 (29 ~ 150) 480p 63 (36 ~ 73) 1600x1200 (UXGA)
  • Page 9 Remote Control Function: If you do not use PC computer management to setup HE05BR, then you could use the IR infrared remote control to preset channel selection. Using the IR remote control to the front of HE05BR will be ok. Initial at first time use the remote control or after change battery of remote control, the IR remote control and the equipment IR ID must be using same ID.
  • Page 10 Remote Control Operation: Select Channel: Mode 1: use select channel, if no any action after 3 seconds then it is the select channel or press immediately to confirm the input channel. Mode 2: select the channel number and press to confirm the input channel. Select Function:...
  • Page 11 IR Key Learning: IR KEY function is use IR module which built-in HKM01BR receiver to learn IR signal of TV remote control and saved in the module, then you could use programmable RS232 command from HKM01BT transmitter to control the IR module send and IR signal to TV. It could control all kinds of TV but do not need RS232 port on it.
  • Page 12 RS-232 Assign Mode(not available for HE05BER): System default setting of RS-232 is extender, the connection topology same as the channel connection. RS232 ports of receivers only connect to the transmitter with same channel ID. You could enable RS232 assign mode to fix the connection of RS232 without channel setting. After the receivers and transmitter you want to keep RS232 connection established then press IR remote button to enable RS-232 assign mode.
  • Page 13 0 ~ 99 (Party No.) OK = Setting successful PARTY Set Party Number ? (display setting) ERROR = Setting fail Character (alphabet character OK = Setting successful Display OSD_ON ERROR = Setting fail screen 60 seconds and numbers) 0 ~ 60000 (Delay OK = Setting successful OSD_OFF Turn off the OSD...
  • Page 14 Caution: 1. Not recommend to work with general LAN connection to avoid large video, data transmission or multicast packets to slow down your other LAN devices. 2. Gigabit switch hub muse use support IGMP protocol and Jumbo Frame over 8K Ethernet Switch Hub in order to achieve the best transmission quality 3.
  • Page 15 Web Setting Function: HE05B provide detail settings over web browser, you have to know the IP address before setting. There are three ways to get the IP address of receiver: 1.Local IP shows on right bottom screen when booting. 2.Press remote control button (IP Address) 3.Install Internet explorer plug-in: Bonjour , click device name to enter web setting page to get the IP address(please refer software installations manual)
  • Page 16 Bonjour plug-in installation: a. Click “BonjourSDKSetup.exe” to install Bonjour plug-in for Internet Explorer. b. Click “Next” to continue. c. Click “I accept the terms in the license agreement” to continue. d. Click “Next” to continue.
  • Page 17 e. Click “Install” to start installation. f. Click “Finish” to exit installation. g. Right click on “My Network Place”  “Properties” then right click on “Local Area Connection”  “Properties” then double click on “Internet Protocol (TCP/IP)” to setting as below: (IP address 169.254.111.111, sub mask 255.255.0.0)
  • Page 18 Login in to the web setting: Use CAT5 cable to connect transmitter/receiver RJ45 port to PC LAN port, open IE browser then select View  Explorer Bars  Bonjour. Double click on “HTTP on ast-gateway(transmitter)” or “HTTP on ast-client (receiver)”, it will pop up web setup in Bonjour windows as below: Click Network page you will see the IP address of transmitter/receiver You could also input the IP address of transmitter / receiver at link column of browser if you know...
  • Page 19 System Menu:  Version Information Firmware version information  Update Firmware Update system firmware  Utilities System tools  Factory Default Set system to factory default  Reboot Reboot system  Default EDID Set EDID to default  Console API Command Run Console API command ...
  • Page 20 Network Menu: IP Setup:  IP Mode could be Auto IP, DHCP, Static three mode, default is Auto IP  Casting Mode : could be Multicast, Unicast mode, default is Multicast,...
  • Page 21 Functions Menu: For HE05BT Transmitter: Video over IP: This function setup the video signals send from network, default is checked. Please note it will turn off HDMI output in same channel if this function be disabled, only analog audio output For HE05BR Receiver: Video over IP: This function setup the video signals send from network, default is checked.
  • Page 22 Serial over IP(not available for HE05BER): This function setup Serial (RS232) signal sends from network  Operation Mode: Default is “Type 2 (Recommended. Dumb redirection.)”  Baudrate Setting for Type 2 : default is 115200, 8, None, 1...
  • Page 23 HE05BT Package Include: Transmitter x 1 IR emitter cable x 1 DC 5V 2Amp power adapter x 1 Software CD x1 HE05BR Package Include: Receiver IR emitter cable x 1 IR remote control x1 DC 5V 2Amp power adapter x 1 HE05BER Package Include: Receiver IR receiver cable x 1...

This manual is also suitable for:

He05btHe05berHe05br