Dacor DTT48 963 Series User Manual page 9

Transitional rangetop
Hide thumbs Also See for DTT48 963 Series:
Table of Contents

Advertisement

Gas Safety
WARNING
To reduce risk of property damage, fire, personal injury, and death:
If you smell gas:
Close the valve and do not use the appliance.
Do not light a match, candle, or cigarette.
Do not turn on any gas or electric appliances.
Do not touch any electrical switches or plug in a power cord.
Do not use any phone in your building, and evacuate the building.
Immediately call your gas supplier from a neighbor's phone. Follow the supplier's directions.
If you cannot reach your gas supplier, call the fire department.
Checking for Gas Leaks
Leak-testing the appliance must be done as the manufacturer directs. Do not use a flame to check for gas leaks.
With a brush, spread a soap-and-water solution around the area in question. If there is a gas leak, small bubbles
will appear in the solution.
Electrical and grounding safety
WARNING
To reduce risk of fire, electric shock, personal injury, and death:
Plug the appliance in to a grounded, 3-prong outlet.
Do not remove the ground prong.
Do not use an adapter or an extension cord.
Do not use a damaged power plug/cord, or loose power outlet.
Do not modify the power plug, cord, or outlet.
Do not put a fuse in a neutral or ground circuit.
Use a dedicated 120-volt, 60-Hz, 20-amp, AC, fused electrical circuit. A time-delay fuse or circuit breaker is
recommended. Plug only the rangetop into this circuit.
Do not connect the ground wire to plastic plumbing, gas, or hot-water lines.
The rangetop must be grounded. If it malfunctions, grounding provides a safe path for the current. The
rangetop's grounding plug must be firmly plugged into an outlet that is properly installed and grounded per
local regulations. If you are unsure your outlet is properly grounded, have it checked by a licensed elec-
trician.
If codes allow a separate ground wire, a qualified electrician should determine the proper path for this
ground wire.
Electrical service to the rangetop must conform to local codes, in the absence of which, it should meet the
latest ANSI/NFPA No. 70 – Latest Revision (for the U.S.) or the Canadian Electrical Code CSA C22.1 – Latest
Revisions.
The rangetop owner shall ensure that proper electrical service is provided.
English 9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dtt48t963gsDtt48t963gm

Table of Contents