Table of Contents
Advertisement
Using your Planetary Mixmaster
4. Place the bowl on the base. Then
gently rotate the bowl in a clockwise
direction until it locks into position (Fig
3). The bowl should feel firm with no
movement.
5. Add ingredients to the mixing bowl.
6. Turn the lever whilst pushing the head
of the mixer down. (Fig. 4)
®
7. Plug the power cord into a 230/240 Volt
AC power outlet.
8. Turn the speed control dial clockwise to
commence mixing (Fig. 5). Please refer
to the mixing guide on page 7.
Warning: Switch off the appliance and
disconnect from supply before changing
Figure 3
accessories or approaching parts that
move in use.
9. When mixing is complete, turn the
speed control dial anti-clockwise to the
'O' position.
11. Turn the lever to release the head of the
mixer until it is locked into the tilt back
position (see Fig1. page 4).
12. To remove the mixing attachment, push
it upwards, turn it clockwise, then pull it
downwards.
13. Once the use of the mixer is over,
unplug the cord from the power outlet.
Figure 4
Bench Mixer
Figure 5
5
Advertisement
Table of Contents
