Connect Power To An M-300 Or M-700 Appliance; Connect Ac Power To An M-300 Or M-700 Appliance - PaloAlto Networks M-700 Hardware Reference Manual

Install the M-300 and M-700 Appliance

Connect Power to an M-300 or M-700 Appliance

M-300 and M-700 appliances have two AC power supplies (the second power supply is for
redundancy). For details on power requirements and power consumption, see
Electrical Specifications.
•

Connect AC Power to an M-300 or M-700 Appliance

Connect AC Power to an M-300 or M-700 Appliance
The following procedure describes how to connect AC power to an M-300 or M-700 appliance.
To avoid injury to yourself or damage to your Palo Alto Networks
that resides on the hardware, read the
STEP 1 |
Plug two AC power cables (provided) in to grounded wall outlets.
Connect the second power cord through a different circuit breaker to provide power
redundancy and to allow for electrical circuit maintenance.
STEP 2 | Insert one power cord in to each of the two power supplies on the back of the appliance.
STEP 3 | Press the power button on the front of the appliance.
If only one power supply is connected, a warning beep will sound.
M-300 and M-700 Appliance Hardware Reference
Product Safety Warnings.
32
M-300 and M-700
hardware or the data
®
2023 Palo Alto Networks, Inc.
©