HOMEDEPOT KSTFA120AG Instruction Manual

HOMEDEPOT KSTFA120AG Instruction Manual

Electric fan

Advertisement

Quick Links

Instruction Manual
Electric Fan
ETLus
KSTFA120AG
For Household Use Only

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS
This fan has a polarized plug (one blade is wider than the other). To reduce the
risk of electric shock, this plug is intended to fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not attempt to defeat this safety feature.
This product employs overload protection (fuse). A blown fuse indicates an
overload or short-circuit situation. If the fuse blows, unplug the product from the
outlet. Replace the fuse as per the user servicing instructions (follow product
marking for proper fuse rating) and check the product, If the replacement fuse
blows, a short-circuit may be present and the product should be discarded or
returned to an authorized service facility for examination and/or repair.
WARNING
– To Reduce The Risk Of Fire Or Electric Shock, Do Not Use This
Fan With Any Solid-State Speed Control Device.
WARNING
– To Reduce The Risk Of Electric Shock, Do Not Expose to Water
or Rain.
WARNING
– This is a fan – not a toy! To reduce the risk of personal injury and
electric shock, it should not be played with or placed where small children can
reach it.
When using electric appliances, basic safety precautions should always be
followed, including the following:
1. Do unplug or disconnect the appliance from the power supply before servicing.
2. Do not use gasoline, thinners, solvents, ammonias or other chemicals for
cleaning.
3. Do clean your fan regularly. Refer to the Cleaning instructions provided. Never
clean the fan in any manner other than as instructed in this manual.
4. Do not operate any fan with a damaged cord or plug. Discard fan or return to
an authorized service facility for examination and/or repair.
5. Do not run cord under carpeting. Do not cover cord with throw rugs, runners,
or similar coverings. Do not route cord under furniture or appliances. Arrange
cord away from traffic area and where it will not be tripped over.
6. Do not use this product outdoors.
7. Do not use this product on wet surfaces.
8. Do not use this product in a bathtub or shower.
9. Do not use near furnaces, fireplaces, stove or other high-temperature heat
sources.
10. Do not immerse this product in water or allow water to drip into the motor
housing.
11. Do not position this fan too close to draperies because they may be drawn into
the rear guard, cutting off airflow.
SAVE THESE INSTRUCTIONS
P1-14606
P2-14606

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KSTFA120AG and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for HOMEDEPOT KSTFA120AG

  • Page 1 ETLus WARNING – To Reduce The Risk Of Fire Or Electric Shock, Do Not Use This Fan With Any Solid-State Speed Control Device. KSTFA120AG WARNING – To Reduce The Risk Of Electric Shock, Do Not Expose to Water or Rain.
  • Page 2 User Servicing Instructions Know Your Fan Grasp plug and remove from the receptacle or other outlet device. Do not unplug Parts and Their Function by pulling on cord. Open fuse cover (A.) by sliding access cover on top of attachment plug towards blades. Remove fuse carefully (B.) by gently prying out the ends of the fuse from the receptacle.
  • Page 3 2. Fix Rear Guard and Fan Blade How to Assemble ●Couple protrusions (three) on the motor section to concaves (three) on the rear guard. P5-14606 ●Fix them firmly by turning the guard fixing ring toward [fasten]. CAUTION: ●Couple the pin on the motor shaft and the concave on the fan blade and Do not insert the plug into the power point before assembly is complete.
  • Page 4 Set Comfort mode COMFORT Ready How to Operate Insert the power plug into a 120V power point. P6-14606 P7-14606 Start Switch on by pushing [ON/OFF] button. (The fan starts at the speed “LOW” ) Pushing [ON/OFF] button again to end the operation. Speed setting Select your preferred fan speed by pushing [SPEED]...
  • Page 5 adjusted upward or downward simply by moving the guard up or down. CAUTION: In the case of no blades installed, please don't run the product. Operating Block Diagram Analysis P8-14606 At High Speed: P9-14606 Rhythm Mode: At Low Speed: Maintenance and Storage WARNING ...
  • Page 6 Disassemble the fan and guard in the inverse order of assembling. Wash off dirt and dust with well squeezed wet soft cloth with water or neutral detergent, then wipe off the detergent. CAUTION:  Do not use volatile solvents such as gasoline, thinner, benzene, wax, kerosene, alcohol, polishing powder, or alkaline detergent.

Table of Contents