HOMEDEPOT F3501 Installation & Operating Instructions

1·、、'"',' 罚 需芒筏芷: :
:, :
CAUTION
符 归
SAFETY RULES
1. To reduce the risk of elect ic shock, insure electricity has been turned off at the circuit breaker or fuse box
『
before beginning.
2. All wi ing must be in accordance with the National Electrical Code and local electrical codes. Electrical
『
installation should be performed by a qualified licensed electrician.
3. WARNING: To reduce the risk of electrical shock and fire, do not use this fan with any solid-state fan speed
control device.
4. WARNING: To reduce the risk of fire, electric shock, or pe
"Acceptable for Fan Support of 45kg (99.12 lbs.) O
box. Most outlet boxes commonly used for the support of light fixtures are not acceptable for fan support and
may need to be replaced. Due to the complexity of the installation of this fan, a qualified licensed elect
is strongly recommended.
5. The outlet box and support structu
minimum of 45KGS. Use only UL Listed outlet boxes marked FOR FAN SUPPORT.
6. The fan must be mounted with a minimum of 7 feet clearance from the trailing edge of the blades to the floor.
7. Avoid placing objects in the path of the blades.
8. To avoid personal injury or damage to the fan and other items, be cautious when working around o
the fan.
9. Do not use wale or detergents when cleaning the fan or fan blades. A dry dust cloth o
『
cloth will be suitable for most cleaning.
10. Aller making electrical connections, spliced conductors should be turned upwa
into the outlet box. The wires should be spread apart with the grounded conductor and the equipment­
grounding conductor on one side of the outlet box.
11. Electrical diagrams a e fo reference only.
『 『
12. The fan is suitable for indoor use only.
13. Please do not use the tan in a specific environment like high tempe『atu『e environment. high
radiation environment.lampblack or other abnormal use envi『onments.
I � � �
TECHNICAL INFORMATION
勹：：��
u
: � 01
INSTALLING THE FAN
Tools Required: Ph仆lips screwdriver, Pair of pliers , straight slot screwdriver , adjustable wrench, step ladder, and wire cutters
INSTALLING THE MOUNTING BRACKET
The ce山ng fan must be installed in a location so that the blades a
to tu n off the powe Follow the instruction below to hang your fan p
「 「
1. For the concrete ce巾ng, drill two holes in the ceiling
and secure the mounting b acket to the ceiling with two
「
<D 8 (distance between the two holes should be
app opriate)expansion screws, flat washers.nuts
「
p ovided and tighten with a spanne
「 「
NOTE:Hange「after the installation must be able to withstand the weight of 45kg or more
I
i�:�: · . \' ,' : "". •
sonal inju y,mount to outlet box marked
『 『
Less" and use mounting screws provided with the outlet
『
e must be securely mounted and capable of reliably suppo
『
I
Light CCT.
Rated power(motor)
34\V E26 4*40W(MAX.) EXCLUDE
e 300mm spacing from the tip of the blade to the nearest objects o
「
operly
「
2. For the wood ceiling, Secure the mounting bracket to the
ceiling is capable of carrying a load of at least 45KGS with
two long mounting screws and washers provided. Be sure
at least 30mm of the screw is threaded into the support
WARNING:SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
THANK YOU FOR YOUR PURCHASE
Thank you for purchasing this quality product.To ensure correct function and safety , please read and save
all instructions before using the product
ician
『
ting a
『
cleaning
『
lightly dampened
『
d and pushed carefully up
『
＠
1. Mounting Bracket
2. Canopy screws
3. Canopy
4. Downrod&hanger ball
5. Canopy cover
6. Coupling cover
7. Bolt
8. Lock pin
Installation & Operating Instructions for the
Owne「's Installation ,Manual
BEFORE INSTALLATION
Unpack your fan and check the contents.You should have followings
己）
9. Top housing
1 O. Blades
11. Fan motor assembly
12. Base plate
13. Light k仆
14. Ga nish nuts
「
15. Wood screws
16. Expansion screws
walls. When hanging the Fan REMEMBER
「
3. Refer to the Fig. in right for mounting when the ceiling 1s
angled max. 15 degree angle
[ _
All rights reserved
F3501
卢
17. Screw washers
18. Balance tapes
19. Remole conlrol sel
- -
Made in China