Page 1
INSTRUCTIONS FOR INSTALLATION AND FOR USE G41JCS09 G41JCS01 G41JCS06 G41JCS24 G41JCS10 G41JCS03 G41JCS08 G41JCS25 G41JCS47 G41JCS46 G41JCS11 G41JCS55 ASSEMBLY INSTRUCTIONS AND MAINTENANCE Slide the flange cover off The holes in the fixing plate have a diameter of 10 mm. (0.39 inch.) man15_159 - G079SI Rev.
Page 2
1) Line up flange and mark where screws will go. Pre-drill holes prior to installation 2) BE SURE TO INSTALL INTO STUDS OR BLOCKING. 3) Be sure flange is straight. 1) Line up flange. Check that tension is set properly. Adjust as needed. 2) Install screws into studs, blocking.
Page 3
• Retain this copy of the safety manual for future reference. • Manufacturer, Ponte Giulio USA can be reached at 1-877-766-8301 or www.PonteGiulio.com • This grab bar is designed to assist the user to sit comfortably, assist user to stand from a seated position, assist user in a slippery and wet environment, give user a secure place to hold, help user maintain their balance.
Page 4
• Do not use hot air, like a heat gun or blow dryer, for drying. DISPOSAL • Recycle unit when removed. All parts are recyclable or reusable. Ponte Giulio USA Inc – W241 S4021 Rockwood Circle – Waukesha, WI 53189 USA – Phone 877-766-8301 – usa@pontegiuliousa.com man15_159 - G079SI Rev. 2020-J (06/11/2020)
This manual is also suitable for:
G41jcs01G41jcs06G41jcs24G41jcs10G41jcs03G41jcs08...
Show all
Need help?
Do you have a question about the G41JCS09 and is the answer not in the manual?
Questions and answers