How To Change Various Settings; Wi-Fi Adapter On/Off; Wi-Fi Connection With A Router (With The Wps Button) - Sharp FX-J80M Operation Manual

HOW TO CHANGE VARIOUS SETTINGS

You can change the functions in the table below.
1.
(with the product OFF)
♪
more 3sec.
2.
Select .
♪
Select "Function number".
Reverse
♪
or
No Function

Wi-Fi adapter ON/OFF

Wi-Fi connection with a router
(with the WPS Button)
Link settings with a smartphone
Initialization of Wi-Fi function
Update
Confirmation of MAC address
Display Wi-Fi network status
Wi-Fi connection with a router
(without the WPS Button)
- AP (Access Point) mode -
Set
3.
Please refer to Page 18 - 20
for the detail of each functions.
4.
Finish the setting.
♪
～
Set
♪
Forward
♪
････
Page
18
18
19
19
19
19
20
20
♪
Turn off
Wi-Fi adapter ON/OFF
1. Select
2. Select "Setting number".
OFF: Stoppage of Wi-Fi function
ON: start the Wi-Fi function
3. Complete
• When is selected, the square rotates
on the display until the setting is completed.
When setting is completed,
Wi-Fi connection with a
router
(with the WPS Button)
1. Select
2. After is displayed, press the WPS
(Wi-Fi Protected Setup) Button of the
router.
Blink
Once connected, receiver level will be displayed.
weak
A connection error is occuring if
Please confirm the router and try again.
3. Complete
18
at the left step.
♪
♪
is displayed.
at the left step.
Blink
Light up
strong
is displayed.
♪