PART NAMES AND LOCATIONS IN ACCESSORY BAG: USER MANUAL, WARRANTY ****** As the manufacturer holds the authority to redesign or modify its products without notice: Any modifications or upgrades of our products will result in this refrigerator varying slightly from this manual but the functionality will remain the same to that as set out within this manual.
• Report any notable defects with the appliance to Chiq or retailer as soon as it is noted. Failure to do so can result in a non-warranty claim. Keep all packaging materials in a safe location until the unit has been installed properly.
Page 4
R600a WARNINGS NOTE: This model uses R600a flammable refrigerant in its sealed system. The following must be observed for your safety: R600a Refrigerant Warning • This appliance contains 0.064kg R600a refrigerant which is environmentally friendly, but flammable. It does not damage the ozone layer, nor does it increase the greenhouse effect.
INSTALLATION INSTRUCTIONS Before Using the Refrigerator • Remove the exterior and interior packing. • Before connecting the refrigerator to a power source, let the unit stand upright for approximately 4 hours to mitigate the possibility of a malfunction in the cooling system from improper handling during transportation.
with three-prong ground. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized service center. • After plugging the appliance into a wall outlet, turn the unit on and allow the unit to cool down for 4-6 hours before placing food in the refrigerator.
OPERATING INSTRUCTIONS Function & Setting The display panel is on the fridge door, the following picture will show the display symbols and functions. When the refrigerator system is connected to power supply for the first time, all icons on the display panel gets illuminated for 2s, and the system runs in the Smart mode by default.
Press and hold the Unlock button more than 3s till a beeping sound, then the Child Lock function will be turned off. Smart mode When smart mode is on, the temperature of the fridge zone is set at 5℃, the convertible zone temperature at -7℃, and freezer zone at- 18℃.
automatically. Or press the Function key till the Fast Freeze is flashing, then quickly press the OK key to confirm. The fast freeze symbol will disappear when it is turned off. Fast Cooling mode Cooling down the fridge temperature in a rapid manner is beneficial to the prevention of food nutrition against lost and the preservation of freshness.
the OK key or wait for 5s to validate the setting. The fridge temperature setting cycles as following: 2℃→3℃→4℃→5℃→6℃→7℃→8℃→OF→2℃ OF indicates the fridge compartment is switched off, and when the OF function takes effect, the fridge compartment will stop cooling. Be sure to take all food out of the fridge compartment before setting this function.
10s. Fault alarm In case E0, E1, E2, EH, or EC is displayed on the display panel, it indicates fault with the refrigerator. Please contact CHIQ service centre for a service call.
GENERAL CARE AND MAINTENANCE Cleaning the Refrigerator • Upon installation of your new appliance, it is recommended that it be cleaned thoroughly and properly maintained thereafter. • Turn off the refrigerator and then unplug the unit from the wall outlet. •...
Page 13
Problem Solution Power cord isn’t plugged in properly. The fridge has no power The circuit breaker tripped or a blown fuse. Try a different power point. There is no light in freezer compartment, only fridge compartment has light. The light is not working.
Page 14
The doors will not close Clean the seals and make sure they are dry before properly. closing the door/s. The storage basket and/or shelves are out of position. For any enquiries, please call the CHiQ Cusotmer care on: 1300 796 688...
Need help?
Do you have a question about the CFD502NBS and is the answer not in the manual?
Questions and answers