Page 1
BOTTOM MOUNT REFRIGERATOR USER MANUAL MODEL CBM283NW CBM282NBS CBM281NSS CBM280NB Customer Service 1300 796 688 www.chiq.com.au...
Page 2
IMPORTANT SAFETY INSTRUCTIONS WARNING 1. Read these instructions. 2. Keep these instructions. 3.Heed all warnings. 4.Follow all instructions. 5. Do not use your refrigerator near water. 6. Clean only with a damp cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8.
WARNING Electric Shock Hazard Failure to follow these instructions can result in electric shock, fire, or death. 1.WARNING–Keep ventilation openings, in both your refrigerator and the built-in structure, clear of obstruction. 2.WARNING–Do not touch the interior of your refrigerator with wet hands. This could result in frostbite.
Preparations for use Installation location Ventilation condition The position you select for the refrigerator installation should be well-ventilated and has less hot air. Do not locate the refrigerator near a heat source such as cooker, boiler, and avoid it from direct sunlight, thus guaranteeing the refrigeration effect while saving energy consumption.
Using your refrigerator Setting the fridge temperature When the refrigerator system is powered on for the first time, all icons on the display panel gets illuminated for 2s. 1. Functions 1.1 Temperature setting COLD When the user does not need a colder temperature. When in normal use.
Page 6
The fridge thermostat and the air regulating rod should be used in combination. When the refrigerator is used under ambient temperature higher than 35℃, do not set it at Mode 5 on the temperature control panel, and meanwhile, adjust the air regulating rod to the right side of the middle position. In this way, the normal operation of the fridge compartment will not be affected.
Page 7
power recovery. 1.5 Power-on delay In order to protect the refrigerator compressor from being damaged in the case of short-time power failure (i.e., less than 5 minutes), the compressor will not be started immediately after it is powered on. 1.6 Fault alarm When the indicator light of Mode 1 or Mode 3 or Mode 5 keeps flashing, it indicates the refrigerator fault.
2.Check the temperature of the frozen food cabinet in the shop where you buy the frozen foods. 3.Make sure the frozen food package is in perfect condition. 4.Always buy frozen products last on your shopping trip or visit to the supermarket. 5.Try to keep frozen food together whilst shopping and on the journey home, as this will help to keep the food cooler.
Page 9
stop its use, so as not to affect the service life. Defrosting This appliance is designed with automatic defrosting function, thus no need to defrost it manually. Changing the lamp The LED lamp is used by the refrigerator for lighting, which features low energy consumption and long service life. In case of any abnormality, please contact the after-sales personnel for visiting service.
no pipe damage on the back of the equipment before handling. Up-to-date information on the options for disposing of old equipment and packaging from old equipment can be obtained from the local municipal office. Reversing the door 1. Make sure that your refrigerator is unplugged. 2.
Page 11
18. Remove the hinge screw hole cover from the top left side of the cabinet, then install it on the top right side of the cabinet. For any enquiries, please call the CHiQ Cusotmer care on: 1300 796 688...
Need help?
Do you have a question about the CBM283NW and is the answer not in the manual?
Questions and answers