1. PRODUCT CHARACTERISTICS (1) Vacuum cleaner for wet and dry (2) Jacks on the base, easy for depositing accessories (3) Blowing function, satisfy different requirements 2. PARTS NAME HANDLE TOP COVER SWITCH BARREL BARREL LOCK CORD INLET & PLUG MOUTH BARREL PEDESTAL SMALL...
Page 4
HOSE ASSEMBLY TUBES FLOOR BRUSH FLITER BAG CREVICE ROUND NOZZLE BRUSH Use the right accessories according to different situations. Bristle for bookshelves, windows and bibulous brush for floor and carpet, tables, etc. Crevice nozzle for crevice, corner, etc. Blowing mouth for blowing the dust away in the crevice of the machine...
3. SAFETY INSTRUCTIONS (1) Check before operation that the local power supply is the same as the specification on the rating label. (2) Do not use machine in the combustible and explosive place in case the motor spark causes fire. (3) Do not jam the air inlet mouth, in case temperature rises and damaging the motor.
(5) Do not overturn the machine in case water goes into the motor and damages the motor. (6) Warning: If water is out from air outlet mouth, do not overturn the machine when being repaired in case water goes into the motor and causes damage. Do not use this machine as pump in case of damaging the motor.
Page 7
Insert hose connector into the blowing mouth as shown in the picture when you want to use its blowing function. As shown in the picture, connect all the accessories for wet & dry cleaning. (2) Operation 1. Insert the plug into the supply socket. 2.
5. PROTECTIVE DEVICE Special instruction concerning protective device. (1) When the water in the barrel is full, the device begins to work. The suction power will vanish at this moment. The machine will make some noise which indicates the motor is running at a high speed. Under this circumstance, you should cut off the electricity, and clean out the water.