Advertisement
(5) Do not overturn the machine in case water goes into the motor and damages the motor.
(6) Warning: If water is out from air outlet mouth, do not overturn the machine when being repaired
in case water goes into the motor and causes damage. Do not use this machine as pump in case of
damaging the motor.
(7) Turn off the machine and remove the plug each time after using or when being repaired.
(8) Keep machine away from strong sunlight and high temperature place in case plastic is distorted.
(9) Do not wrest, tramp, or haul hose in case of making it damaged.
(10) Do not immerse the barrel cap into the water or wash with water in case water goes into the
electrophorus parts and causing person injured
The correct way should be: immerse the dishcloth firstly, and then dry it. Finally, wipe the dirty part
gently.
(11) The power cord must be replaced by the designated repairing center or professionals.
4. OPERATION METHOD
(1) Connection
Insert the hose connector into the air inlet mouth, as shown in the picture; make sure the connector
is tightly fastened.
Press the connector button as shown in the picture, and pull the connector out when you want to
pull hose connector from machine.
5
Advertisement
