SVS Sound Revolution PB-1000 Pro Owner's Manual page 8

PB-1000 Pro
SUBWOOFER
Connecting Multiple Subwoofers or "Going Dual"
Running two or more subwoofers has many acoustic benefits such as: improved frequency
response throughout the listening area, fewer peaks and nulls, increased output and decreased
bass localization. The RCA Outputs provide an easy way to integrate multiple PB-1000 Pros or
other subwoofers into your audio system.
Many AV Receivers and Surround Processors have more than one subwoofer output.
As described previously, you can run a single connection from each subwoofer output
to each of your subwoofers.
RECEIVER/PREAMP
If you have more subwoofers than Sub Outputs from your AV Receiver, an easy
solution is to use an RCA splitter or RCA Y-adapter to divide the subwoofer output. This
is the most commonly recommended way to connect multiple subwoofers when there
is only one Sub Out.
RECEIVER/PREAMP
Another option is to use the Left and Right RCA outputs on the PB-1000 Pro to Daisy
Chain additional subwoofers. It's important to use the matching output and input
terminals. For example, if you are using the RCA inputs, be sure to use the RCA outputs
to daisy chain to the next subwoofer.
NOTE: While the settings of each subwoofer should be similar, you will probably find that
each sub will need to be calibrated for optimal performance because of its unique room
placement. Regardless of how you use your subwoofer, experimentation can often result in
better sound. Don't be afraid to try different settings, you can always return the controls to
their defaults.
RECEIVER/PREAMP
LINE LEVEL OUTPUTS
REAR FRONT
SUBWOOFER SUBWOOFER
CENTER
(SUB1) (SUB2)
LINE LEVEL OUTPUTS
REAR FRONT
SUBWOOFER
CENTER
(SUB1)
LINE LEVEL OUTPUTS
REAR FRONT
SUBWOOFER
CENTER
(SUB1)
CONNECTING & CONTROLLING YOUR SUBWOOFER