SVS Sound Revolution PB-1000 Pro Owner's Manual page 5

PB-1000 Pro
SUBWOOFER
AC Power Connection
Connect the subwoofer power cord to the subwoofer amplifier and directly into an AC outlet.
Convenience outlets located on the rear panel of some AV receivers or pre/pros are NOT recom-
mended for your PB-1000 Pro as these outlets are not meant for high power devices.
Line Level Connection – Single LFE Channel
The most common way to connect your PB-1000 Pro is with a single RCA interconnect cable going
from the LFE or SUB1 Output on your AV receiver or preamplifier to the LFE Input on your
PB-1000 Pro. This allows your processor to perform the upstream bass management and send
the subwoofer a pre-filtered mono signal.
RECEIVER/PREAMP
LINE LEVEL OUTPUTS
SUBWOOFER
CENTER
(SUB1)
Line Level Connection – Stereo Receiver or Preamplifier Left/Right Channels
Both Left and Right inputs on your PB-1000 Pro can be used in a two-channel stereo application
with a stereo preamplifier that has Left and Right line level outputs.
Connect the left and right outputs of your preamplifier to the left and right line level inputs of the
PB-1000 Pro using RCA interconnects.
CONNECTING & CONTROLLING YOUR SUBWOOFER
REAR FRONT
LFE