CONCORD QV5522 Manual page 42

5.6.1.2 NTP Settings
The NTP (Network Time Protocol) function allows your Wireless NVR to automatically sync its clock with a time
server. This gives it the ability to constantly have an accurate time setting (your Wireless NVR will periodically sync
automatically).
5.6.1.3 DST Settings
The DST (Daylight Saving Time) function allows you to select the amount of time that Daylight Saving has increased
by in your particular time zone or region.
Enable DST: If Daylight Saving applies to your time zone or region, check this option to enable.
Check to enable the NTP, and select a Server
Address, click Update Now to manually sync
the date & time.
Click Apply to save your settings.
When NTP function is enabled, system will
update the system time at 00:07:50 per day,
or every time when the system is starting up.
42
42