CONCORD QV5522 Manual page 7

3.3 Password
The first time you run the NVR, you will be asked to set your own password, which is important to help protect your
privacy. You can also change the Admin username for extra security. You may want to write down your username
and password in a safe place in case you forget them in the future.
Language: Choose your preferred language to be shown on-screen.
Device ID: Input the device ID shown in the parentheses (). Default ID is 000000.
View more about Device ID on 5.6.1 General further within this manual.
New Admin name: To set your own administrator name.
New Admin Password: To set your own password. The password must be a combination of 8 characters.
Confirm Password: Enter your own password again.
Click Apply to confirm your settings you will then be taken to the login interface. Enter your user name & password
to Login.
NOTE: If you forget your password, you will be unable to login to the system. You will need to contact Concord to
reset the password if you are locked out. Visit: www.concord.support.
7
7