Table of Contents
Advertisement
NLService
PressStart / Pause.
3.
The modified ready in time is
activated.
13.9 Soaking laundry
Remark:No additional detergent is
needed. The soapy water is then used
for washing.
Start the program.
1.
To pause the program, after about
2.
10 minutes, pressStart / Pause.
To resume the program after the
3.
desired soaking time, press Start /
Pause.
13.10 Adding laundry
After the program has started, you
can remove or add laundry
depending on the program status.
onStart / Pauseto press.
1.
The device pauses.
Remark:If you want to add laundry,
follow the instructions on the
display.
→ "Display", page 22
Open the door.
2.
Reload or remove the laundry.
3.
Close the door.
4.
onStart / Pauseto press.
5.
13.11 Program Cancel
onStart / Pauseto press.
1.
Open the door.
2.
At high temperature and high
water level, the appliance door
remains locked for safety reasons.
– Start the program at a high
temperatureTo rinse.
30
– Start the program at a high water
levelCentrifuge or select a
suitable program for draining.
→ "Programs", Page 24
Remove the laundry.
3.
→
"Taking out the laundry",
Page 30
13.12 Resume program at
rinse hold
Requirements
sThe rinse hold is activated.
→ "Buttons", Page 23
sThe last rinse of the
The set program has ended and the
laundry is in the rinse water.
The programCentrifugeor set a
1.
drain program.
→ "Programs", Page 24
onStart / Pauseto press.
2.
13.13 Take out the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
13.14 Switching off the device
Turn the program selector onOut
1.
at.
Close the water tap.
2.
sets-
Advertisement
Table of Contents
