Before Using For The First Time; Starting A Wash Cycle Without Laundry - Siemens WM14N0M2FG User Manual And Installation Instructions

Table of Contents

Advertisement

NL
usage
6 Before first use
B prepare the device for use
use.
6.1 Starting a wash cycle
without laundry
Your device has been thoroughly
checked before leaving the factory. To
remove any residual water, wash
without any laundry the first time.
Turn the program selector onCotton
1.
90°to make.
Close the door.
2.
Pull out the detergent drawer.
3.
Approx. Pour 1 liter of tap water into
4.
compartment II.
20
Fill powder detergent into
5.
compartment II.
To avoid foaming, use only half the
amount recommended by the
detergent manufacturer for light
soiling. Do not use wool or delicate
detergent.
Slide the detergent drawer into the
6.
appliance.
To start the program, press Start /
7.
Pauseto press.
aThe display shows the remaining
program duration.
aAfter the program end, it shows
display: "End".
Start the first wash cycle or turn the
8.
program selector toOut
to turn off the device.
→ "The Ministry in Essence",
Page 28
to make,

Advertisement

Table of Contents
loading

Table of Contents