Committing Changes To The Settings - Real Time Automation 460BCQT-NNA4 Product User Manual

Committing Changes to the Settings

•
All changes made to the settings of the gateway in Configuration Mode will not take effect until the
gateway is restarted via the webpage. Changes will not be stored if the gateway's power is removed
prior to a reboot.
•
NOTE: The gateway does not need to be restarted after every change. Multiple changes can be made
before a restart, but they will not be committed until the gateway is restarted.
•
When all desired changes have been made, press the Restart Now button.
•
The webpage will redirect to our rebooting page shown below:
•
The reboot can take up to 20 seconds.
o If the IP address has not been modified, the gateway will automatically redirect to the main page.
o If the IP address was modified, a message will appear at the top of the page to instruct the user to
manually open a new webpage at that new IP.
Real Time Automation, Inc. 13 1-800-249-1612