Westfalia WBS300 Original Instructions Manual page 11

▪ Switch off the impact drill immediately when the tool insert jams. Be
prepared for high reaction torque that can cause kickback. The tool insert
jams when the power tool is subject to overload or it becomes wedged in
the workpiece.
▪ When working with the machine, always hold it firmly with both hands
and provide for a secure stance. The power tool is guided more secure
with both hands.
▪ Secure the workpiece. A workpiece clamped with clamping devices or in a
vice is held more secure than by hand.
▪ Keep your workplace clean. Blends of materials are particularly
dangerous. Dust from light alloys can burn or explode.
▪ Always wait until the machine has come to a complete stop before placing
it down. The tool insert can jam and lead to loss of control over the impact
drill.
▪ Never use the impact drill with a damaged cable. Do not touch the
damaged cable and pull the mains plug when the cable is damaged while
working. Damaged cables increase the risk of an electric shock.
11