Taking Pictures Using Auto Bracket - Panasonic Lumix DMC-TS3 Owner's Manual

·
[Rec] Mode:

Taking Pictures Using Auto Bracket

In this mode, 3 pictures are automatically recorded in the selected Exposure
Compensation range each time the shutter button is pressed. You can select the picture
with the desired exposure from the 3 pictures with different exposures.
With Auto Bracket d1 EV
1st picture
d0 EV
Press 3 [È] until [Auto Bracket] appears, set the
compensation range of the exposure with 2/1.
• When you do not use Auto Bracket, select [OFF] (0).
Press [MENU/SET].
Note
•
When setting Auto Bracket, [
•
When taking pictures using Auto Bracket after setting the Exposure Compensation range, the
pictures taken are based on the selected Exposure Compensation range.
When the exposure is compensated, the Exposure Compensation value appears on the lower
left of the screen.
•
The exposure may not be compensated with Auto Bracket depending on the brightness of the
subject.
•
[Œ] is set for the flash when Auto Bracket is set.
•
Setting of the auto bracket cannot be performed in following conditions.
–
In [Transform], [Panorama Assist], [Handheld Night Shot], [Hi-Speed Burst], [Flash Burst],
[Starry Sky], [Pin Hole], [Film Grain] and [Photo Frame] in Scene Mode
–
When recording motion pictures
Recording
¿
2nd picture
j1 EV
] appears on the screen.
- 64 -
3rd picture
i1 EV