[Protect] - Panasonic Lumix DMC-TS3 Owner's Manual

You can set protection for pictures you do not want to be deleted by mistake.
Select [Protect] on the [Playback] Mode menu.
Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/
SET].
Select the picture, and then press
[MENU/SET].
•
The settings are canceled when [MENU/
SET] is pressed again.
•
Exit the menu after it is set.
∫ Canceling all the [Protect] settings
1
Select [Protect] on the [Playback] Mode menu.
2
Press 3/4 to select [CANCEL] and then press [MENU/SET].
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
Note
•
The protect setting may not be effective on other equipment.
• Even if you protect pictures in the built-in memory or a card, they will be deleted if the built-in
memory or the card is formatted.
• Even if you do not protect pictures on a card, they cannot be deleted when the card's
Write-Protect switch is set to [LOCK].
Playback/Editing

[Protect]

[SINGLE]
Press 2/1 to
select the picture.
- 136 -
(P44)
[MULTI]
Press 3/4/2/1
to select the
pictures.