Panasonic Lumix DMC-TS3 Owner's Manual page 178

Motion Picture Recording stops in the middle.
•
Use a card with SD Speed Class with "Class 4" or higher when recording motion pictures in
[AVCHD].
Also, use a card with SD Speed Class with "Class 6" or higher when recording motion pictures
in [Motion JPEG].
•
Depending on the type of the card, recording may stop in the middle.
> If Motion Picture Recording stops during use of a card of at least "Class 4" or if you use a
card that has been formatted on a PC or other equipment, the data-writing speed is lower.
In such cases, we recommend that you make a backup of the data and then format
the card in this unit.
The subject cannot be locked. (AF track fails)
•
If the subject has different colors as the periphery, set the AF area to those colors specific to
the subject by aligning that area with the AF area.
Recorded image may be warped, or nonexistent color is surrounding the
subject.
•
It is possible that the subject may be warped slightly, or the borders get colored, depending on
the zoom magnification, due to the characteristics of the lens. Also, the peripherals of the
image might look warped because the perspective is enhanced when the wide angle is used.
This is not a malfunction.
The inner side of the lens is fogged.
•
The inside of the lens may fog due to condensation depending on the environment this unit is
used in, areas that undergo a significant change in temperature or in high humidity, etc. Refer
"
to When inner side of the lens is fogged (condensation)
Others
(P104)
Lens
"
on P6
- 178 -
for what to do.
(P53)