Built-In Flash; Vqt0S19 - Panasonic Lumix DMC-LX1 Operating Instructions Manual

Taking Pictures using the Built-in Flash
When you set the flash, you can take
pictures using the built-in flash according to
the recording condition.
n To open the flash
Slide the [< OPEN] switch
A
Photo flash
B
• Do not cover the photo flash with your
fingers or any other items.
n To close the flash
Press the flash until it clicks.
• Be sure to close the flash when not in use.
• The flash setting is fixed to Forced OFF
[v] while the flash closes.
40

VQT0S19

Recording pictures (basic)
1 2
SCN SCN
.
A
B
n Switching to the appropriate flash
setting
Set the flash setting of the built-in flash
according to the scene to be recorded.
For the selectable flash settings, refer to
"Available flash settings by recording
mode" on P42.