Connecting To A Pc - Panasonic Lumix DMC-LX1 Operating Instructions Manual

Connecting to a PC

• By connecting the camera to a computer,
you can upload your pictures, then use
the software on the included CD-ROM
([LUMIX Simple Viewer] and
[PHOTOfunSTUDIO] for Windows
print or send your images by e-mail.
• If you use Windows 98/98SE, install the
USB driver and then connect it to the
computer.
• For details about [LUMIX Simple Viewer]
and installation, refer to the separate
operating instructions for PC connection.
D
E
C
ACCESS
: AC adaptor (DMW-AC5; optional)
A
• Make sure this unit is off before
connecting or disconnecting the AC
adaptor (DMW-AC5, optional).
: USB connection cable (supplied)
B
: This message appears during data
C
transfer.
: Check the facing of the connector and
DE
push straight in.
106
VQT0S19
Connecting to a PC or Printer
®
) to
B
A
1
Switch the camera on and set
[USB MODE] to [PC] in the setup
menu (P105).
• If you have set [USB MODE] to
[PictBridge (PTP)], the computer may
show an error message.
Click [Cancel] to close the dialog and
disconnect the cable from the computer.
Change the setting to [PC] and reconnect
the cable.
2
Connect the camera to a PC via
the USB connection cable B
(supplied).
• Connect the USB connection cable with
the [f] mark facing the [w] mark on
the [DIGITAL] socket.
• Hold and then insert or pull the USB
D
connection cable straight.
Do not try to force the connector in
backwards or sideways. This can damage
this unit and the equipment you are
connecting.
[Windows]
The drive appears on the [My Computer]
folder.
• If it is the first time you are connecting the
camera to a PC, the required driver is
installed automatically so that the camera
can be recognized by the Windows Plug
and Play, then it appears on the [My
Computer] folder.
[Macintosh]
The drive appears as [NO_NAME] or
[Untitled].