Troubleshooting - Panasonic Lumix DMC-LX1 Operating Instructions Manual

Panasonic lumix dmc-lx1: user guide
Table of Contents

Advertisement

Troubleshooting

If you put the menu back to the settings at the time of purchase, the conditions may be
improved. Carry out the [RESET] in the setup menu. (P25)
n Battery and power supply
Conditions
The camera will not turn
on.
The camera turns off
soon after turning it on.
n Shooting
Conditions
The picture cannot be
recorded.
The subject is not
focused properly.
The recorded picture is
blurred.
The recorded pictures
are pale.
There is dirt on the lens.
Shooting of motion
pictures stops
unexpectedly.
118
VQT0S19
Others
Is the battery inserted correctly? Check the direction of the
battery.
Is the battery sufficiently charged?
Use a battery that has been sufficiently charged.
The battery is out of power. Recharge the battery or use one
that has sufficient charge.
Is the card inserted?
Is the mode dial correctly set?
Is there any memory capacity left on the card?
Before recording, delete some pictures.
The focus range varies depending on the recording mode.
Rotate the mode dial to set to the proper mode for the
distance to the subject.
Is the subject out of the focus range? (P32)
When you cannot focus on the subject even if you tried many
times, turn the camera off once and turn it on again.
When taking a picture in shaded areas or indoors, the shutter
speed becomes slow and the Optical Image Stabilizer
function may not work properly. In this case, we recommend
holding the camera with both hands firmly to take pictures
(P32).
Stains, such as fingerprints, may be on the lens. If the surface
of the lens is dirty, turn on the camera and clean it with a soft
cloth.
This camera is not compatible with motion picture recording
on MultiMediaCards.
When you set the [PICT.MODE] to [30fpsVGA] or [30fps16:9],
use cards that have a speed of 10 MB/second or better
(shown on the card packaging) for best results.
Shooting may stop unexpectedly with some types of card or if
you use a card whose memory has been fragmented by
repeated shooting and erasure. Clean up the card with this
unit beforehand for best results (P103).
Causes
Causes

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents